
WiFi Module 5 802.11a/b/g/n/ac Dual Band
Identical specifications to the original Hardkernel ODROID WiFi Module 5 Add dual-band 2.4/5GHz 802.11ac capability (plus other modes) with USB3.0/...
View full detailsIdentical specifications to the original Hardkernel ODROID WiFi Module 5 Add dual-band 2.4/5GHz 802.11ac capability (plus other modes) with USB3.0/...
View full detailsAdd wireless capability to your ODROID or other SBC! Also compatible with Windows, Mac, Desktop Linux, Raspberry Pi, Banana Pi and more! No drive...
View full detailsAdd wireless capability to your ODROID or other SBC! Also compatible with Windows, Mac, Desktop Linux, Raspberry Pi, Banana Pi and more! No drive...
View full detailsAdd wireless capability to your ODROID or other SBC! Also compatible with Windows, Mac, Desktop Linux, Raspberry Pi, Banana Pi and more! No driv...
View full detailsThis shield is perfect for building stand-alone projects with an inexpensive user interface. The 2 buttons allow basic control. The 7 LEDs can be...
View full details30-pin and 12-pin dual-stacking header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own sh...
View full details30-pin and 12-pin header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own shield for the O...
View full detailsKEY FEATURES Lithium Polymer rechargeable cell with a protection circuit Capacity: 750mAh Dimension: 50 x 21 x 9 mm Lead wires: AWG#30, 50mm Conne...
View full detailsKEY FEATURES Breaks out stereo audio from the HDMI port to a 3.5mm (1/8 inch) jack Includes 3.5mm (1/8 inch) audio cable (not needed if using spea...
View full detailsUpgrade power supply for the XU / XU+E / XU Lite / XU3 / XU3 Lite / XU4. KEY FEATURES 100-240VAC input 5V/6A DC output Switching-mode power adapte...
View full detailsUSB3.0 OTG Micro-A type connector to standard-A host connector converter cable. Convert the OTG Micro-A converter on the XU series to a standard U...
View full detailsThe Weather Board 2 is the preferred low-cost environmental sensing solution with BME280 and Si1132 on one board. The combination of the BME280 and...
View full detailsAdd compatibility with the 40-pin GPIO standard to your XU4 or XU3/XU3-Lite*. Use almost any accessory designed for the ODROID-C series 40-pin head...
View full detailsCompatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield 2 provides stereo RCA connectors and an S/PDIF...
View full detailsCompatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield provides stereo RCA connectors, a 3.5mm stereo...
View full detailsYou're probably itching to put together some fun embedded computer projects with the ODROID-C1, ODROID-XU4 with Shifter Shield, or other SBC with R...
View full detailsFully assembled 3.2 inch 320x240 display with resistive touch overlay. Simply plug it into the SBC's 26-pin or 40-pin header. Leaves 14 pins unus...
View full detailsThe Chroma C Servo Board allows control of up to eight radio-control (RC) servos or electronic speed controllers (ESC) via the GPIO pins on the C0/...
View full detailsSqueezing all the performance possible out of your XU4 or U3? Operating in enclosed or harsh environments? Replace the passive heatsink with this a...
View full detailsKEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC NOTES Compatible with C2 /...
View full detailsKEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC 90-degree L-Type connector ...
View full detailsKEY FEATURES Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. long (approx.) COMPATIBILITY ODROID-N2 ODROID-H2 ROCKPro64 ODR...
View full detailsAdapts Hardkernel eMMC modules (64GB or smaller) to a standard microSD card connector. This allows eMMC modules to be read from and written to by ...
View full detailsUninterruptible power supply (and battery backup) designed specifically for the ODROID-C1/C1+/C2, and compatible with similar SBCs like Raspberry P...
View full details