Accessories

KEY FEATURES 100~240VAC input 5V/2A DC output 2.5mm outer(-) diameter/0.7mm inner(+) diameter barrel connector Switching mode adapter NOTES ...

KEY FEATURES 100~240VAC input 5V/3A DC output Switching mode adapter 3.5mm Outer(-) Diameter/1.35mm Inner(+) Diameter Barrel Connector Length...

The preferred power supply for the XU / XU+E / XU Lite / XU3 / XU3 Lite / XU4 and VU8. KEY FEATURES 100-240VAC input 5V/4A DC output Switching-mod...

Product may differ slightly from picture. KEY FEATURES  4x USB 3.0 HUB Plug & Play and Hot Swappable UP to 5Gbps LED light display Window...

USB3.0 OTG Micro-A type connector to standard-A host connector converter cable.  Convert the OTG Micro-A converter on the XU series to a standard U...

KEY FEATURES Fits the ODROID-VU7 touchscreen ABS or PLA Plastic 3D printed on high-end enthusiast 3D printers at a resolution of 0.25mm layer...

The Weather Board 2 is the preferred low-cost environmental sensing solution with BME280 and Si1132 on one board. The combination of the BME280 and...

Add a full-HD (1920x1080) color camera to your VoCore! KEY FEATURES Resolution: 1920x1080 Codecs: H.264, MJPEG Up to 30fps @ 1920x1080 (may be slo...

Add Gigabit Ethernet capability to your USB3.0-equipped ODROID with this adapter.  USB2.0-equipped SBCs will run at a slower speed. Picture is for ...

Add compatibility with the 40-pin GPIO standard to your XU4 or XU3/XU3-Lite*. Use almost any accessory designed for the ODROID-C series 40-pin head...

Add wireless and bluetooth 4.0 capability to your PINE A64/A64+ and SoPine! This module is made specifically for the PINE A64 and SoPine families o...

Compatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield 2 provides stereo RCA connectors and an S/PDIF...

Compatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield provides stereo RCA connectors, a 3.5mm stereo...

You're probably itching to put together some fun embedded computer projects with the ODROID-C1, ODROID-XU4 with Shifter Shield, or other SBC with R...

Fully assembled 3.2 inch 320x240 display with resistive touch overlay.  Simply plug it into the SBC's 26-pin or 40-pin header.  Leaves 14 pins unus...

The CSI connector on the Raspberry Pi Zero is smaller than the one on the standard-sized Raspberry Pi. This cable allows the Official Raspberry Pi ...

The Chroma C Servo Board allows control of up to eight radio-control (RC) servos or electronic speed controllers (ESC) via the GPIO pins on the C0/...

Squeezing all the performance possible out of your XU4 or U3? Operating in enclosed or harsh environments? Replace the passive heatsink with this a...

KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC NOTES Compatible with C2 /...

KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC 90-degree L-Type connector ...

KEY FEATURES Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. long (approx.) COMPATIBILITY ODROID-N2 ODROID-H2 ROCKPro64 ODR...

Adapts Hardkernel eMMC modules (64GB or smaller) to a standard microSD card connector. This allows eMMC modules to be read from and written to by ...