12 pin GPIO ribbon cable for XU4

12 pin GPIO ribbon cable for XU4

$1.95

12-pin cable for ODROID-XU4 I2S Port  

$1.95
12V/2A POWER SUPPLY FOR ODROID-HC2

12V/2A POWER SUPPLY FOR ODROID-HC2

$5.95

This Power Supply delivers high quality stable and low noise power supply for the Odroid-HC2. Power supply "brick" only.  US or EU 2-pin power cord...

View full details
$5.95
15V/4A Power Supply

15V/4A Power Supply

$11.95

Power supply for the ODROID-H2. 3-pin power cord not included. KEY FEATURES AC 100~240 Volt input DC 15Volt / 4A output Switching mode power adapt...

View full details
$11.95
16GB MicroSD UHS-1 C0/C1/C1-Plus Android (Chartreuse Dot)

16GB MicroSD UHS-1 C0/C1/C1-Plus Android (Chartreuse Dot)

$10.40

KEY FEATURES   Sandisk Ultra UHS-1 module Preinstalled Android Ready to run NOTE See picture for demonstration of how to install COMPATIB...

View full details
$10.40
16GB MicroSD UHS-1 C1+ Linux (Pink Dot)

16GB MicroSD UHS-1 C1+ Linux (Pink Dot)

$10.40

KEY FEATURES   Sandisk Ultra UHS-1 module Preinstalled Ubuntu Ready to run NOTE See picture for demonstration of how to install COMPATI...

View full details
$10.40
16GB MicroSD UHS-1 C2 Android (Green Box)

16GB MicroSD UHS-1 C2 Android (Green Box)

$10.40

KEY FEATURES   Sandisk Ultra UHS-1 module Preinstalled Android Ready to run NOTE See picture for demonstration of how to install COMPATIB...

View full details
$10.40
16GB MicroSD UHS-1 C2 Linux (Red Box)

16GB MicroSD UHS-1 C2 Linux (Red Box)

$10.40

KEY FEATURES   Sandisk Ultra UHS-1 Module Preinstalled Ubuntu Ready to run NOTE See picture for demonstration of how to install COMPATIBILI...

View full details
$10.40
16GB MicroSD UHS-1 U Linux

16GB MicroSD UHS-1 U Linux

$10.40

KEY FEATURES   Sandisk Ultra UHS-1 module Preinstalled Ubuntu Ready to run COMPATIBILITY ODROID-U2 / U3

$10.40
16GB MicroSD UHS-1 XU3/XU4 Linux (Blue Dot)

16GB MicroSD UHS-1 XU3/XU4 Linux (Blue Dot)

$10.40

KEY FEATURES   Sandisk Ultra UHS-1 module Preinstalled Ubuntu Ready to run COMPATIBILITY ODROID-XU3 / XU3-Lite / XU4 / HC1 / MC1

$10.40
16Port I2C GPIO Board

16Port I2C GPIO Board

$6.95

This module is the 16 way GPIO expander for the I2C interface, and built with the MCP23017. MCP23017 has a high-speed I2C interface which supports ...

View full details
$6.95
16x2 LCD + IO Shield

16x2 LCD + IO Shield

$16.95

This shield is perfect for building stand-alone projects with an inexpensive user interface.  The 2 buttons allow basic control.  The 7 LEDs can be...

View full details
$16.95
16x2 LCD with I2C Kit

16x2 LCD with I2C Kit

$6.95

Kit includes: (1) 16x2 LCD module and LCD I2C interface module (pre-assembled)(4) 10cm (4") female-to-female jumper wires (color of wires will vary...

View full details
$6.95
3.5 inch Touchscreen Display Shield (Recertified)
Save 48%

3.5 inch Touchscreen Display Shield (Recertified)

$28.95
$14.95

We have a limited number of Hardkernel ODROID 3.5" Touchscreen Display Shield recertified units in stock. Each one has been fully tested and certif...

View full details
$28.95
$14.95
Save 48%
30-pin and 12-pin Dual-Stacking Header Sockets

30-pin and 12-pin Dual-Stacking Header Sockets

$2.95

30-pin and 12-pin dual-stacking header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own sh...

View full details
$2.95
30-pin and 12-pin Header Sockets

30-pin and 12-pin Header Sockets

$1.95

30-pin and 12-pin header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own shield for the O...

View full details
$1.95
3000mAh Battery

3000mAh Battery

$12.95

KEY FEATURES   Lithium Polymer rechargeable cell with a protection circuit. Capacity : 3000mAh Lead wires: AWG#30, 50mm Connector : Molex 51021...

View full details
$12.95
5V/6A Power Supply

5V/6A Power Supply

$15.95

Upgrade power supply for the XU / XU+E / XU Lite / XU3 / XU3 Lite / XU4.   KEY FEATURES 100-240VAC input 5V/6A DC output Switching-mode power adap...

View full details
$15.95
7 pin GPIO ribbon cable for C1/C2

7 pin GPIO ribbon cable for C1/C2

$1.95

7 pin GPIO ribbon cable (200mm) for C1+ / C2

$1.95
750mAh Battery

750mAh Battery

$6.45

KEY FEATURES   Lithium Polymer rechargeable cell with a protection circuit. Capacity : 750mAh Dimension: T:8.2 x W:20.5 x H:49.5 mm (+/- 0.2mm tol...

View full details
$6.45
92x92x25mm DC Cooling Fan w/PWM, Speed Sensor
Sold out

92x92x25mm DC Cooling Fan w/PWM, Speed Sensor

$5.95

Cooling fan designed for use with the ODROID-H2

$5.95
Sold out
Biscuit - Programmable WiFi 9-Axis Absolute Orientation Sensor

Biscuit - Programmable WiFi 9-Axis Absolute Orientation Sensor

$29.95

The Biscuit™ is an integrated module consisting of 3 dimensional motion sensor and WiFi communication module. The 3 dimensional motion sensor inclu...

View full details
$29.95
C0 Connector Pack

C0 Connector Pack

$1.95

This connector pack gives your C0 projects ultimate flexibility. Soldering equipment and skills are required. Most connectors are identical to thos...

View full details
$1.95
C0/C1+/C2 HiFi Shield 2 with S/PDIF

C0/C1+/C2 HiFi Shield 2 with S/PDIF

$39.95

Compatible with the ODROID-C0/C1+/C2. Not compatible with the original ODROID-C1.   The HiFi Shield 2 provides stereo RCA connectors and an S/PDIF ...

View full details
$39.95
C0/C1+/C2 HiFi Shield Plus with S/PDIF

C0/C1+/C2 HiFi Shield Plus with S/PDIF

$29.95

Compatible with the ODROID-C0/C1+/C2. Not compatible with the original ODROID-C1.   The HiFi Shield provides stereo RCA connectors, a 3.5mm stereo ...

View full details
$29.95

You recently viewed

Clear recently viewed