Stereo Boom Bonnet (Amp + Speakers)
Add amplified stereo sound to your single-board computer project! KEY FEATURES Ready to assemble - no soldering required! Android and Ubuntu compa...
View full detailsAdd amplified stereo sound to your single-board computer project! KEY FEATURES Ready to assemble - no soldering required! Android and Ubuntu compa...
View full detailsKEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC NOTES Compatible with C2 /...
View full detailsFully assembled 3.2 inch 320x240 display with resistive touch overlay. Simply plug it into the SBC's 26-pin or 40-pin header. Leaves 14 pins unus...
View full detailsUninterruptible power supply (and battery backup) designed specifically for the ODROID-C1/C1+/C2, and compatible with similar SBCs like Raspberry P...
View full detailsYou're probably itching to put together some fun embedded computer projects with the ODROID-C1, ODROID-XU4 with Shifter Shield, or other SBC with R...
View full detailsCompatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield provides stereo RCA connectors, a 3.5mm stereo...
View full detailsThis module is the 16 way GPIO expander for the I2C interface, and built with the MCP23017. MCP23017 has a high-speed I2C interface which supports ...
View full detailsThese are spare header pins for the ODROID-GO Kit, and are also an excellent choice for your DIY project. Warranty is valid for two weeks, startin...
View full detailsKEY FEATURES USB to IO expansion board for GPIO/PWM/SPI/UART/I2C/ADC interfaces 3.3V/5V compatible PIC18F45K50-QFN USB microcontroller is mounted ...
View full detailsThe SmartPower2 power supply not only provides 4-5.3VDC output at up to 5A, but also has WiFi connectivity built-in to allow monitoring power utili...
View full details12-pin cable for ODROID-XU4 I2S Port Warranty is valid for two weeks, starting upon date of receipt.
This shield is perfect for building stand-alone projects with an inexpensive user interface. The 2 buttons allow basic control. The 7 LEDs can be...
View full detailsKEY FEATURES Blue and white 16x2 character LCD Integrated I2C module for communication Adjustable LCD contrast INCLUDES (1) 16x2 LCD module and...
View full detailsKEY FEATURES Blue and white 16x2 character LCD Integrated I2C module for communication Adjustable LCD contrast INCLUDES (1) 16x2 LCD module and...
View full detailsKEY FEATURES Lithium Polymer rechargeable cell with a protection circuit Capacity: 750mAh Dimension: 50 x 21 x 9 mm Lead wires: AWG#30, 50mm Conne...
View full details7 pin GPIO ribbon cable (200mm) for C1+ / C2 Warranty is valid for two weeks, starting upon date of receipt.
The Biscuit™ is an integrated module consisting of 3 dimensional motion sensor and WiFi communication module. The 3 dimensional motion sensor inclu...
View full detailsBoost your Computer / SBC to the next level of storage performance with SSD or HDD. The USB3.0 to SATA Bridge Board contains a USB3.0 to SATA3 con...
View full detailsSpecially-designed adapter board for improved display quality under heavy loads when connected to an ODROID-XU4/XU3. This bridge board is designed ...
View full detailsThe Chroma C Servo Board allows control of up to eight radio-control (RC) servos or electronic speed controllers (ESC) via the GPIO pins on the C0/...
View full detailsThe U3 IO Shield is designed to be mounted to the U3 via spacers and connected via the 8 pin GPIO connector on the U3. It is meant as a developmen...
View full detailsThe U3 Shield Tinkering Kit is a bag of goodies to add on to the U3 IO Shield to give makers more possibilities for ODROID-connected electronics. I...
View full detailsAdd back up power to your U3 board! The ODROID-UPS2-U3 (Uninterrupted Power Supply) device is designed specifically for the ODROID-U3. It is equipp...
View full detailsSign up to get "In The Know"
Copyright © 2024 ameriDroid.