30-pin and 12-pin Dual-Stacking Header Sockets
30-pin and 12-pin dual-stacking header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own sh...
View full details30-pin and 12-pin dual-stacking header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own sh...
View full detailsThe SmartPower2 power supply not only provides 4-5.3VDC output at up to 5A, but also has WiFi connectivity built-in to allow monitoring power utili...
View full detailsThe Chroma C Servo Board allows control of up to eight radio-control (RC) servos or electronic speed controllers (ESC) via the GPIO pins on the C0/...
View full detailsThe U3 IO Shield is designed to be mounted to the U3 via spacers and connected via the 8 pin GPIO connector on the U3. It is meant as a developmen...
View full detailsCompatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield provides stereo RCA connectors, a 3.5mm stereo...
View full detailsCompatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield 2 provides stereo RCA connectors and an S/PDIF...
View full detailsThe Biscuit™ is an integrated module consisting of 3 dimensional motion sensor and WiFi communication module. The 3 dimensional motion sensor inclu...
View full detailsThis shield is perfect for building stand-alone projects with an inexpensive user interface. The 2 buttons allow basic control. The 7 LEDs can be...
View full detailsThe Weather Board 2 is the preferred low-cost environmental sensing solution with BME280 and Si1132 on one board. The combination of the BME280 and...
View full detailsKEY FEATURES USB to IO expansion board for GPIO/PWM/SPI/UART/I2C/ADC interfaces 3.3V/5V compatible PIC18F45K50-QFN USB microcontroller is mounted ...
View full detailsKEY FEATURES Lithium Polymer rechargeable cell with a protection circuit Capacity: 750mAh Dimension: 50 x 21 x 9 mm Lead wires: AWG#30, 50mm Conne...
View full detailsKEY FEATURES Inner is positive (RED wire) and outer is negative (BLACK) wire Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. lo...
View full detailsKEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC 90-degree L-Type connector ...
View full detailsUninterruptible power supply (and battery backup) designed specifically for the ODROID-C1/C1+/C2, and compatible with similar SBCs like Raspberry P...
View full detailsAdd GPS Capability to your ODROID or other SBC running Linux or Android! KEY FEATURES Ublox chipset with patch antenna 50 channel u-blox engine ...
View full detailsKEY FEATURES Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. long (approx.) COMPATIBILITY ODROID-N2 ODROID-H2 ROCKPro64 ODR...
View full detailsFully assembled 3.2 inch 320x240 display with resistive touch overlay. Simply plug it into the SBC's 26-pin or 40-pin header. Leaves 14 pins unus...
View full detailsReal Time Clock Shield for the ODROID-C2 and C4 Attach this RTC Shield to the GPIO header on the ODROID-C2 or C4 to keep time when the C2/C4 is off...
View full detailsYou're probably itching to put together some fun embedded computer projects with the ODROID-C1, ODROID-XU4 with Shifter Shield, or other SBC with R...
View full detailsAdd compatibility with the 40-pin GPIO standard to your XU4 or XU3/XU3-Lite*. Use almost any accessory designed for the ODROID-C series 40-pin head...
View full detailsKEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC NOTES Compatible with C2 /...
View full detailsThis USB Audio Adapter should work with any system, but requires configuration through ALSA or other sound drivers. The CM108AH is a highly integra...
View full detailsSystem console interface board for platform development and debugging. KEY FEATURES CP2104: USB to Serial UART bridge IC with 1.8V interface Molex...
View full detailsAdd a battery for the real-time clock (RTC) on your ODROID / BIOS on Atomic Pi. Keep time / settings even when disconnected from power. KEY FEATUR...
View full detailsSign up to get "In The Know"
Copyright © 2024 ameriDroid.