PINE H64 Model B

Out of stock

$44.95

RAM

2GB

3GB

Quantity

The PINE H64 Model B is a Single Board Computer by PINE64. The form factor of the board has changed from the PINE H64 model A to the smaller Rock64/Raspberry Pi footprint. The basic layout of the I/O on the PINE H64-B also mirrors that of the Rock64, including the position of the eMMC module socket, microSD slot, USB 3.0 and 2.0 ports, as well as digital audio and power connectors. This means that existing cases designed for the Rock64 will also fit the new PINE H64 Model B.

The H64-B is powered by an Allwinner “H6” Quad-Core ARM Cortex A53 @ 1.8GHz 64-Bit Processor with MALI-T720 MP2 GPU @ 600Mhz. The PINE H64-B is equipped with either 2GB or 3GB RAM of system memory and 128Mbit SPI boot Flash. There is also an eMMC module socket for optionally adding an eMMC up to 128GB and microSD slot for booting. The board is equipped with 1x USB 3.0 Host, 2x USB 2.0 Host, Gigabit Ethernet, PI-2 GPIO Bus, as well as many other peripheral device interface such as UART, SPI, I2C, for makers who wish to integrate with sensors and other peripherals.

Additional items required to operate - see "NOT INCLUDED" section below

KEY FEATURES

Quad-core ARM Cortex-A53 Processor @1.8GHz (32KB L1 Instruction cache per core, 32KB L1 Data cache per core, and 512KB L2 cache - shared among cores, virtualization support, 28nm process)
ARM Mali T-722MP2 Dual-core GPU - Supports OpenGL ES 3.1/3.0/2.0/1.1, OpenCL 1.2/1.1, ATSC (Adaptive Scalable Texture Compression), FAST
2GB and 3GB LPDDR3 RAM configurations
Built-in 128Mbit SPI Flash memory
eMMC socket
MicroSD slot - bootable, supports SDHC and SDXC, storage up to 256GB
10/100/1000Mbps Gigabit Ethernet
1x USB3.0 Host port and 2x USB2.0 Host port
HDMI 2.0 out - Digital Video up to 4KP60 (HDCP2.2)
3.5mm stereo earphone/microphone plug
2x20 pin PI-2 GPIO Header
Wifi: 802.11bgn 2.4G + external antenna (1T1R, RTL8723BS chip)
Bluetooth: 2.1/3.0/4.0 LE (RTL8723BS chip)
RTC battery connector for integrated real-time clock
SPDIF connector
Power & Reset buttons

NOT INCLUDED

No power supply included - Consider a Pine 5DCV/3A power supply available on this site
No microSD or eMMC card included - eMMC memory is much faster than microSD memory
No case included
No HDMI cable included - needed to connect to a display device. Recommend HDMI2.0 cable to support 4K output
USB-UART module highly recommended for tinkering with u-boot, kernels, multiple installs and more

NOTES

Although the Allwinner H6 SoC technically supports PCIe, it has been reported that the implementation is broken. Therefore, no PCIe interface is available on the H64-B.
SoC video support: Ultra HD 4k and Full HD 1080p video decoding of MPEG-2, MPEG-4 SP/ASP GMC, H.263, H.264, H.265, WMV9/VC-1, and VP8, BD Directory, BD ISO and BD m2ts video decoding, H.264 High Profile 1080P@60fps encoding, 3840×1080,1920×2160 3D decoding, Complies with RTSP, HTTP,HLS,RTMP,MMS streaming media protocol

LINKS

ameriDroid Learn - https://ameridroid.com/blogs/ameriblogs/tagged/pine-h64b
H64 Wiki Page - http://wiki.pine64.org/index.php/PINE_H64_Main_Page
Armbian OS Image - https://www.armbian.com/pine-h64-b/
Android OS Links - http://wiki.pine64.org/index.php/PINE_H64_Main_Page#Android_7.x

Warranty is valid for thirty days, starting upon date of receipt.

Testing TinkerCAD on Chrome on Android TV 7 on H64-B 3GB Model (2019-08-28) - Raw Video starting from boot-up, using built-in WiFi:

Filters

Accessories

Architecture

Bluetooth

Brand

Cases

cases

Charger

Cooling

Plug

Power

RAM

Recommended Power Supply

Smart

WiFi

PINE64

PINE H64 Model B

You recently viewed

Navigate

Community

Support

Follow us

VIP