12V/2A Power Supply Plug
This Power Supply delivers high quality stable and low noise power supply for the ODROID-HC2, ODROID-N2, ODROID-C4 and other systems with a 5.5/2.1...
View full detailsThis Power Supply delivers high quality stable and low noise power supply for the ODROID-HC2, ODROID-N2, ODROID-C4 and other systems with a 5.5/2.1...
View full detailsAdd a battery for the real-time clock (RTC) on your ODROID / BIOS on Atomic Pi. Keep time / settings even when disconnected from power. KEY FEATUR...
View full detailsPower supply for any system that needs 15V at up to 4A with a barrel connector (5.5mm/2.1mm), such as the ODROID-H2+ and the Odyssey. KEY FEAT...
View full detailsUpgrade power supply for the XU / XU+E / XU Lite / XU3 / XU3 Lite / XU4. KEY FEATURES 100-240VAC input 5V/6A DC output Switching-mode power adapte...
View full detailsAdd a battery for the real-time clock (RTC) on your ODROID-N2-Plus and other systems with a CR2032 socket. Also designed for standard PCs with a BI...
View full detailsThis Power Supply delivers high quality stable and low noise power supply for the ODROID-HC2, ODROID-N2, ODROID-C4 and other systems that have a 5....
View full detailsKEY FEATURES Inner is positive (RED wire) and outer is negative (BLACK) wire Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. lo...
View full detailsReal Time Clock Shield for the ODROID-C2 and C4 Attach this RTC Shield to the GPIO header on the ODROID-C2 or C4 to keep time when the C2/C4 is off...
View full detailsKEY FEATURES Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. long (approx.) COMPATIBILITY ODROID-N2 ODROID-H2 ROCKPro64 ODR...
View full detailsKEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC 90-degree L-Type connector ...
View full detailsThis is a spare battery pack for the ODROID-GO Kit or other devices that have the Molex 51021-0200 connector for LiPo batteries. Lithium Polymer re...
View full detailsKEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC NOTES Compatible with C2 /...
View full detailsUninterruptible power supply (and battery backup) designed specifically for the ODROID-C1/C1+/C2, and compatible with similar SBCs like Raspberry P...
View full detailsThe SmartPower2 power supply not only provides 4-5.3VDC output at up to 5A, but also has WiFi connectivity built-in to allow monitoring power utili...
View full detailsKEY FEATURES Lithium Polymer rechargeable cell with a protection circuit Capacity: 750mAh Dimension: 50 x 21 x 9 mm Lead wires: AWG#30, 50mm Conne...
View full detailsAdd back up power to your U3 board! The ODROID-UPS2-U3 (Uninterrupted Power Supply) device is designed specifically for the ODROID-U3. It is equipp...
View full detailsSign up to get "In The Know"
Copyright © 2024 ameriDroid.