Prototyping Aids

USB-UART Module Kit
Out of stock

USB-UART Module Kit

$12.95

System console interface board for platform development and debugging. KEY FEATURES CP2104: USB to Serial UART bridge IC with 1.8V interface Molex...

View full details
$12.95
Out of stock
LED Power Button

LED Power Button

$7.95

Blue illuminated Power Button for the ODROID-H2 with pre-assembled jumper wires. There is a small power switch on the ODROID-H2 board. But it is n...

View full details
$7.95
DC Plug and Cable Assembly 5.5mm L-Type

DC Plug and Cable Assembly 5.5mm L-Type

$1.95

KEY FEATURES Inner is positive (RED wire) and outer is negative (BLACK) wire Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. lo...

View full details
$1.95
Large Breakout Board for Atomic Pi

Large Breakout Board for Atomic Pi

$19.95

The Large Breakout board is much more robust than the Baby Breakout board. The board provides large screw terminal I/O, prototype area, USB<-&g...

View full details
$19.95
RTC Shield for C2 / C4

RTC Shield for C2 / C4

$5.45

Real Time Clock Shield for the ODROID-C2 and C4 Attach this RTC Shield to the GPIO header on the ODROID-C2 or C4 to keep time when the C2/C4 is off...

View full details
$5.45
XU4 Shifter Shield

XU4 Shifter Shield

$19.95

Add compatibility with the 40-pin GPIO standard to your XU4 or XU3/XU3-Lite*. Use almost any accessory designed for the ODROID-C series 40-pin head...

View full details
$19.95
Pinecil v2 Soldering Iron

Pinecil v2 Soldering Iron

$37.95

The Pinecil v2 is a smart mini portable soldering iron with a 32-bit RISC-V SoC featuring a sleek design, auto standby and it heats up to an operat...

View full details
$37.95
USB-UART Serial Console

USB-UART Serial Console

$3.95

System console interface board for platform development and debugging. INCLUDES  (1) UART Interface Board (4) 8" Female-Female Jumper Wires KEY F...

View full details
$3.95
DC Plug and Cable Assembly 5.5mm

DC Plug and Cable Assembly 5.5mm

$1.95

KEY FEATURES Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. long (approx.) COMPATIBILITY ODROID-N2 ODROID-H2 ROCKPro64 ODR...

View full details
$1.95
Pinecil Soldering Iron
Out of stock

Pinecil Soldering Iron

$37.95

New version of Pinecil, Pinecil v2 available here. The Pinecil is a smart mini portable soldering iron with a 32-bit RISC-V SoC featuring a sleek d...

View full details
$37.95
Out of stock
Weather Board 2

Weather Board 2

$19.95

The Weather Board 2 is the preferred low-cost environmental sensing solution with BME280 and Si1132 on one board. The combination of the BME280 and...

View full details
$19.95
DC Plug and Cable Assembly 2.5mm L-Type

DC Plug and Cable Assembly 2.5mm L-Type

$1.95

KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC 90-degree L-Type connector ...

View full details
$1.95
2x20 Pin Female Header Extender

2x20 Pin Female Header Extender

$2.95

2x20pin header socket is useful when you plug a shield on the ODROID-N2 or any other system with a 2x20 (40-pin) GPIO header when more clearance ...

View full details
$2.95
DC-DC 12A Stepdown Voltage Converter

DC-DC 12A Stepdown Voltage Converter

$14.95
$9.95

Product may differ slightly from picture. Provide high-current power to your single-board computer or other electronics project using this high-qu...

View full details
$14.95
$9.95
USB-UART 2 Module Kit

USB-UART 2 Module Kit

$12.95

System console interface board for platform development and debugging. The major change of the USB-UART2 Kit is a Type-C Connector from Micro-USB. ...

View full details
$12.95
I2C 20×4 LCD Module
Out of stock

I2C 20×4 LCD Module

$8.95

This LCD displays 20 characters wide, 4 rows in white texts on blue background. It has a back-light, a contrast adjust potentiometer, and a simple ...

View full details
$8.95
Out of stock
Female-Female Jumper Wires - 40 pcs x 4 in.

Female-Female Jumper Wires - 40 pcs x 4 in.

$3.95
$2.95

KEY FEATURES Great for making DIY wire harnesses or jumping between headers on PCBs. Dupont-style breadboarding/prototyping wires Wires are ...

View full details
$3.95
$2.95
30-pin and 12-pin Dual-Stacking Header Sockets

30-pin and 12-pin Dual-Stacking Header Sockets

$2.95

30-pin and 12-pin dual-stacking header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own sh...

View full details
$2.95
30-pin and 12-pin Header Sockets

30-pin and 12-pin Header Sockets

$1.95

30-pin and 12-pin header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own shield for the O...

View full details
$1.95
DC Plug and Cable Assembly 2.5mm

DC Plug and Cable Assembly 2.5mm

$1.95

KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC NOTES Compatible with C2 /...

View full details
$1.95
30-Pin Ribbon Cable for XU4

30-Pin Ribbon Cable for XU4

$5.95
$4.45

KEY FEATURES Provides a convenient means to connect the XU3, XU3-Lite and XU4 expansion port to your own projects 5.5 inch long ribbon cable Warr...

View full details
$5.95
$4.45
C0/C1/C1+/C2 Tinkering Kit

C0/C1/C1+/C2 Tinkering Kit

$19.95

You're probably itching to put together some fun embedded computer projects with the ODROID-C1, ODROID-XU4 with Shifter Shield, or other SBC with R...

View full details
$19.95
ODROID-GO 10pin male header 5 pack

ODROID-GO 10pin male header 5 pack

$1.95

These are spare header pins for the ODROID-GO Kit, and are also an excellent choice for your DIY project. Warranty is valid for two weeks, startin...

View full details
$1.95
Male-Female Jumper Wires - 40 pcs x 8in.
Out of stock

Male-Female Jumper Wires - 40 pcs x 8in.

$3.95

KEY FEATURES Jumper wires (Dupont-style breadboarding/prototyping wires) for jumping between GPIO pins or establishing an electrical connection be...

View full details
$3.95
Out of stock

You recently viewed

Clear recently viewed
x