Prototyping Aids

System console interface board for platform development and debugging. KEY FEATURES CP2104: USB to Serial UART bridge IC with 1.8V interface Molex...

Blue illuminated Power Button for the ODROID-H2 with pre-assembled jumper wires. There is a small power switch on the ODROID-H2 board. But it is n...

KEY FEATURES Inner is positive (RED wire) and outer is negative (BLACK) wire Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. lo...

The Large Breakout board is much more robust than the Baby Breakout board. The board provides large screw terminal I/O, prototype area, USB<-&g...

Real Time Clock Shield for the ODROID-C2 and C4 Attach this RTC Shield to the GPIO header on the ODROID-C2 or C4 to keep time when the C2/C4 is off...

Add compatibility with the 40-pin GPIO standard to your XU4 or XU3/XU3-Lite*. Use almost any accessory designed for the ODROID-C series 40-pin head...

The Pinecil v2 is a smart mini portable soldering iron with a 32-bit RISC-V SoC featuring a sleek design, auto standby and it heats up to an operat...

System console interface board for platform development and debugging. INCLUDES  (1) UART Interface Board (4) 8" Female-Female Jumper Wires KEY F...

KEY FEATURES Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. long (approx.) COMPATIBILITY ODROID-N2 ODROID-H2 ROCKPro64 ODR...

New version of Pinecil, Pinecil v2 available here. The Pinecil is a smart mini portable soldering iron with a 32-bit RISC-V SoC featuring a sleek d...

The Weather Board 2 is the preferred low-cost environmental sensing solution with BME280 and Si1132 on one board. The combination of the BME280 and...

KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC 90-degree L-Type connector ...

2x20pin header socket is useful when you plug a shield on the ODROID-N2 or any other system with a 2x20 (40-pin) GPIO header when more clearance ...

System console interface board for platform development and debugging. The major change of the USB-UART2 Kit is a Type-C Connector from Micro-USB. ...

This LCD displays 20 characters wide, 4 rows in white texts on blue background. It has a back-light, a contrast adjust potentiometer, and a simple ...

30-pin and 12-pin dual-stacking header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own sh...

30-pin and 12-pin header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own shield for the O...

KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC NOTES Compatible with C2 /...

You're probably itching to put together some fun embedded computer projects with the ODROID-C1, ODROID-XU4 with Shifter Shield, or other SBC with R...

These are spare header pins for the ODROID-GO Kit, and are also an excellent choice for your DIY project. Warranty is valid for two weeks, startin...

KEY FEATURES Jumper wires (Dupont-style breadboarding/prototyping wires) for jumping between GPIO pins or establishing an electrical connection be...

GPIO Dual Edge connection is a board that leads the 40Pin GPIO pins of the ODROID (or any other board with 40pin GPIO) out of convenient use. It he...

3-in-1 Mobile Power Voltage, Current Meter, USB Charger Meter.  KEY FEATURES Includes RESET button to clear time and total consumed. Displays: DC...

Want to brighten up your Raspberry Pi Zero, while making it easier to identify pins? How about adding some color, with color coded GPIO headers! Th...

The SmartPower2 power supply not only provides 4-5.3VDC output at up to 5A, but also has WiFi connectivity built-in to allow monitoring power utili...

Motion detector sensor for use with the ODROID-GO Game Kit. KEY FEATURES Voltage: 5V – 20V Power Consumption: 65mA TTL output: 3.3V, 0V Lock time:...

The ROM-WT138LM(N) series are remote control receiver modules designed for use with the ODROID-GO Game Kit. Pin diode and receiver IC are assembled...

12-pin cable for ODROID-XU4 I2S Port Warranty is valid for two weeks, starting upon date of receipt.

Do you want to add a small, lightweight portable audio output to your project? With this mini stereo audio amplifier, add one (mono) or two (stereo...

KEY FEATURES Jumper wires (Dupont-style breadboarding/prototyping wires) for establishing an electrical connection between two points in a circuit...

KEY FEATURES Jumper wires (Dupont-style breadboarding/prototyping wires) for jumping between GPIO pins or establishing an electrical connection be...

Handy assortment of 1.27mm (.050") male header and female connectors for the VoCore and VoCore2 SBCs. Can also be used on other projects with 1.27m...

Need a breadboard for your next development project, or just tinkering for fun? Looking to build and test circuits to integrate into your design? L...

KEY FEATURES M3 Threading Outside Measurements: Nylon: ~5.5mm hex Brass: ~4.5mm hex Aluminum: ~4.5mm hex Conductivity: Nylon: Non-conductive B...

Add-on for 2x13 or 2x20 2.5mm pitch SBCs (single-board computers) like Raspberry Pi2 and ODROID-C1+. For creation of circuits to use with compatibl...

7 pin GPIO ribbon cable (200mm) for C1+ / C2 Warranty is valid for two weeks, starting upon date of receipt.

Need a small breadboard for your next development project, or just tinkering for fun? Looking to build and test circuits to integrate into your des...

The NVIDIA® Jetson Xavier™ NX Developer Kit brings supercomputer performance to the edge. It includes a power-efficient, compact Jetson Xavier NX mo...

This kit comes with enough resistors for most projects at an affordable price. Great for people who are just starting out with electronics. KEY FEA...

This Red, Green, Blue (RGB), and Clear Light Sensing with IR Blocking Filter is designed for use with the ODROID-GO Game Kit, and can be used for p...

The 36-pin 2.54mm (0.1") pitch solderable pin header is designed to be used in signal wire-to-board and board-to-board applications. They are sin...

KEY FEATURES No Load Running Speed: 0.14sec/60° at 4.8V, 0.12sec/60° at 6V Torque Force: 1.3kg/cm at 4.8V, 1.5kg/cm at 6V Size :  23 x 12.2 x 29mm...

This kit includes 370 high voltage capacitors in varying quantities based on frequency of use. KEY FEATURES 630V high voltage multilayer cerami...

KEY FEATURES 1/4 Watt 10 Pieces Each of 86 Values. 860 Pieces Total High Quality 1% Metal Film Resistors Copper Wire Every value is in order from ...

KEY FEATURES 33 of the most common capacitance values from 4.7pF to 470uF 15 each of 23 values and 30 each of the 10 most common values. High qual...