USB-UART Module Kit
Out of stock

USB-UART Module Kit

$12.95

System console interface board for platform development and debugging. KEY FEATURES CP2104: USB to Serial UART bridge IC with 1.8V interface Molex...

View full details
$12.95
Out of stock
LED Power Button

LED Power Button

$7.95

Blue illuminated Power Button for the ODROID-H2 with pre-assembled jumper wires. There is a small power switch on the ODROID-H2 board. But it is n...

View full details
$7.95
DC Plug and Cable Assembly 5.5mm L-Type

DC Plug and Cable Assembly 5.5mm L-Type

$1.95

KEY FEATURES Inner is positive (RED wire) and outer is negative (BLACK) wire Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. lo...

View full details
$1.95
RTC Shield for C2 / C4

RTC Shield for C2 / C4

$5.45

Real Time Clock Shield for the ODROID-C2 and C4 Attach this RTC Shield to the GPIO header on the ODROID-C2 or C4 to keep time when the C2/C4 is off...

View full details
$5.45
XU4 Shifter Shield

XU4 Shifter Shield

$19.95

Add compatibility with the 40-pin GPIO standard to your XU4 or XU3/XU3-Lite*. Use almost any accessory designed for the ODROID-C series 40-pin head...

View full details
$19.95
DC Plug and Cable Assembly 5.5mm

DC Plug and Cable Assembly 5.5mm

$1.95

KEY FEATURES Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. long (approx.) COMPATIBILITY ODROID-N2 ODROID-H2 ROCKPro64 ODR...

View full details
$1.95
Weather Board 2

Weather Board 2

$19.95

The Weather Board 2 is the preferred low-cost environmental sensing solution with BME280 and Si1132 on one board. The combination of the BME280 and...

View full details
$19.95
DC Plug and Cable Assembly 2.5mm L-Type

DC Plug and Cable Assembly 2.5mm L-Type

$1.95

KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC 90-degree L-Type connector ...

View full details
$1.95
2x20 Pin Female Header Extender

2x20 Pin Female Header Extender

$2.95

2x20pin header socket is useful when you plug a shield on the ODROID-N2 or any other system with a 2x20 (40-pin) GPIO header when more clearance ...

View full details
$2.95
USB-UART 2 Module Kit

USB-UART 2 Module Kit

$12.95

System console interface board for platform development and debugging. The major change of the USB-UART2 Kit is a Type-C Connector from Micro-USB. ...

View full details
$12.95
I2C 20×4 LCD Module
Out of stock

I2C 20×4 LCD Module

$8.95

This LCD displays 20 characters wide, 4 rows in white texts on blue background. It has a back-light, a contrast adjust potentiometer, and a simple ...

View full details
$8.95
Out of stock
30-pin and 12-pin Dual-Stacking Header Sockets

30-pin and 12-pin Dual-Stacking Header Sockets

$2.95

30-pin and 12-pin dual-stacking header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own sh...

View full details
$2.95
30-pin and 12-pin Header Sockets

30-pin and 12-pin Header Sockets

$1.95

30-pin and 12-pin header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own shield for the O...

View full details
$1.95
DC Plug and Cable Assembly 2.5mm

DC Plug and Cable Assembly 2.5mm

$1.95

KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC NOTES Compatible with C2 /...

View full details
$1.95
C0/C1/C1+/C2 Tinkering Kit

C0/C1/C1+/C2 Tinkering Kit

$19.95

You're probably itching to put together some fun embedded computer projects with the ODROID-C1, ODROID-XU4 with Shifter Shield, or other SBC with R...

View full details
$19.95
ODROID-GO 10pin male header 5 pack

ODROID-GO 10pin male header 5 pack

$1.95

These are spare header pins for the ODROID-GO Kit, and are also an excellent choice for your DIY project. Warranty is valid for two weeks, startin...

View full details
$1.95
SmartPower2 5VDC Power Supply
Out of stock

SmartPower2 5VDC Power Supply

$44.95

The SmartPower2 power supply not only provides 4-5.3VDC output at up to 5A, but also has WiFi connectivity built-in to allow monitoring power utili...

View full details
$44.95
Out of stock
12 pin GPIO ribbon cable for XU4

12 pin GPIO ribbon cable for XU4

$2.45

12-pin cable for ODROID-XU4 I2S Port Warranty is valid for two weeks, starting upon date of receipt.

$2.45
7 pin GPIO ribbon cable for C1/C2

7 pin GPIO ribbon cable for C1/C2

$1.95

7 pin GPIO ribbon cable (200mm) for C1+ / C2 Warranty is valid for two weeks, starting upon date of receipt.

$1.95
U3 Shield Tinkering Kit

U3 Shield Tinkering Kit

$15.95

The U3 Shield Tinkering Kit is a bag of goodies to add on to the U3 IO Shield to give makers more possibilities for ODROID-connected electronics. I...

View full details
$15.95
U3 IO Shield

U3 IO Shield

$19.95

The U3 IO Shield is designed to be mounted to the U3 via spacers and connected via the 8 pin GPIO connector on the U3.  It is meant as a developmen...

View full details
$19.95

You recently viewed

Clear recently viewed
x