ODROID-H2 Case Type 7

The ODROID-H2 Case Type 7 is designed for users desiring high performance networking and up to 2 2.5" SATA drives inside the enclosure. This case can be run fanless -- hot air can escape through the 92mm cooling fan opening -- or a 92x92mm standard PC cooling fan (optional) can be installed for active cooling.

  • Supported storage
    • On-board eMMC 5.1 module
    • On-board M.2 NVMe (NGFF-2280)
    • Up to 2x 2.5" SATA HDD or SSD (max height 15mm)
  • SATA data & power cables required for attaching SATA drives (available separately)
  • This case is compatible with the H2 Net Card (available separately)
  • Disk drive mounting screws (M3x6mm) are included in the package
  • Power and reset switches are accessible through the hole at the front
  • Optional LED Power Button (diameter: 16mm) can be installed at the front
  • Size: 128 (L) x 157 (W) x 111 (H) mm
  • A. Bottom panel
  • B. Front panel
  • C. 2.5″ SATA HDD/SSD bracket
  • D. 2.5″ SATA HDD/SSD bracket
  • E. Left Panel
  • F. Right panel
  • G. Top panel
  • H. Inner bracket
  • I. Rear panel
  • J. 16 x 6mm M3 Truss Head Bolts
  • K. 4 x M5 Nuts
  • L. 4 x M5 Truss Head Bolts
  • M. 2 x 16x9mm (M) Steel PCB Supports
  • N. 4 x 40mm (F) PCB Supports
  • O. 4 x 20mm (M) PCB Supports
  • P. 4 x 40mm (M) PCB Supports
  • Q. 4 x Rubber Feet (Round / Clear)
  • R. 1 x 92mm Stainless Cooling Fan Grill


You recently viewed

Clear recently viewed