ODROID-MC1 Cluster


The ODROID-MC1 is a cluster of embedded computing designed to be used as an affordable and flexible solution for cluster computing. The MC1 provides combined resources of 32 CPU cores, 8GB DRAM, 4x Gigabit Ethernet connections, 4 USB2.0 ports, and 4 UART serial ports in a stacked array complete with integrated heatsink and 80mm cooling fan.

The MC1 can easily run Samba, FTP, NFS, SSH, webservers, SQL, Docker, WordPress and other server software smoothly with full Linux distributions like Ubuntu, Debian, Arch and OMV.

Although each MC1 node is related to the ODROID-XU4, all less-necessary features for this use case have been removed from the original ODROID-XU4 including the HDMI and eMMC connectors, external USB3.0 ports, power button, and boot selector switch. The specifications for ODROID-MC1 kit are listed below.

Links to compliance documentation available at the bottom of this listing.

Additional items required to operate -  see "NOT INCLUDED" section below


  • Samsung Exynos5422 Cortex™-A15 2Ghz and Cortex™-A7 Octa core CPUs (multiplied by 4)
  • 2GB LPDDR3 RAM PoP stacked (multiplied by 4)
  • 1 x USB 2.0 Host (multiplied by 4)
  • Gigabit Ethernet port (multiplied by 4)
  • MicroSD UHS-1 Slot tested to 128GB capacities for boot media (multiplied by 4)
  • Serial UART header (multiplied by 4)
  • Integrated metal frame acting as a passive heatsink with included 80mm cooling fan
  • Operating temperature range: approx. -10C to +45C
  • Fully software compatible with ODROID-XU4, XU3 and XU3-Lite
  • Low cost, small form factor, high performance!
  • Linux server OS images based on modern Kernel 4.9 and 4.14 LTS
  • PCB Dimensions: 56 x 47 mm each (2.20 x 1.85 in. approx. not including heatsink/tray)
  • Case Dimensions: 112 x 93 x 72 mm (4.4 x 3.7 x 2.8 in.)


  • ODROID-MC1 Board  (multiplied by 4)
  • Aluminum Stackable Mounting Frame/Heatsink  (multiplied by 4)
  • 80mm USB-powered fan


  • microSD module to contain the operating system (multiplied by 4)
  • Compatible power supply (multiplied by 4)


  • No power supply included
  • No microSD or eMMC card included - eMMC memory is much faster than microSD memory
  • USB-UART module highly recommended for tinkering with u-boot, kernels, multiple installs and more


  • 5V/4A power supply with 5.5mm/2.1mm barrel, center positive and outer negative (multiplied by 4)


  • No HDMI/display port as this is designed as a headless server
  • Guaranteed production to the middle of 2020, but production expected to significantly exceed that date
  • Power consumption normally in the 4A-8A range, but can approach 16A during heavy computing loads with USB devices attached
  • If connecting an HDD externally through the USB port, consider using the 5V/6A power supply



Warranty is valid for thirty days, starting upon date of receipt.

    You recently viewed

    Clear recently viewed