ODROID-N2+ Home Assistant Bundle
See "Availability Updates" below for latest availability information
If selecting a preorder item, read our Preorder terms and conditions before ordering.
The Home Assistant developers challenged themselves: What would the perfect home automation hub look like? Not just software, but also hardware and looks?
The result is this limited edition Home Assistant Blue bundle. Hardware that is affordable and fast, packed in a gorgeous case and powered by the most powerful home automation software on the planet: Home Assistant.
- We received notification on 14-Jun-2021 that due to the worldwide electronic component shortage, the availability date of the next batch of Home Assistant Blue units is expected in late June, but only a limited number will be available. The next batch will be available in late July or August - place orders early to secure a spot in line
The Blue Vision
Home Assistant Blue is the perfect platform to run Home Assistant, with the perfect look.
Easy to use
Powered by our Home Assistant Operating System, getting started is as easy as plugging in the network and power cables and opening up the Home Assistant mobile app to get started.
Home Assistant Blue comes with eMMC storage. That’s the same type of storage your phone uses. A sudden loss of power won’t fry it.
Home Assistant Blue looks as good as the software that runs it: eye-catching. Together with Hahn Werke we have designed a beautiful aluminum case.
All software that runs on Home Assistant Blue is open source. Including all the hardware drivers. We’ve worked with BayLibre to fix bugs and get it merged upstream in the Linux kernel!
- ODROID-N2+ with 4GB RAM
- eMMC storage with Home Assistant pre-installed
- Blue Bundle: 128GB eMMC
- Standard Bundle: 64GB eMMC
- RTC backup battery
- Limited edition Home Assistant Blue case
- Power adapter (12V/2A)
Home Assistant Blue is future proof
Home Assistant Blue is powered by a powerful processor, a good amount of memory and comes with large and reliable storage.
It allows you to easily run Home Assistant, a couple of add-ons and then a couple more. It will be able to easily integrate thousands of devices and run thousands of automations.
I already run Home Assistant. Is this for me?
- If your Home Assistant installation has outgrown your Raspberry Pi or if you want a well supported and dedicated system, Home Assistant Blue is for you.
- Or if you are still looking for a present for friends and family.
What is limited about the bundle?
- We have only created a limited number of cases. Once they are sold out, we don’t currently have plans to make more. All other parts of the bundle will remain available for purchase.
What software does this run?
- Home Assistant Blue comes flashed with the official Home Assistant installation for the ODROID-N2+.
|Form Factor||Dimensions: 105mm x 98mm x 33mm approximately.
Weight: 300g including heatsink and HomeAssistant Blue metal cases
|Processor||Amlogic S922X Processor (12nm fab) Quad-core Cortex-A73 (up to 2.4Ghz) and Dual-core Cortex-A53 (up to 2Ghz)
ARMv8-A architecture with Neon and Crypto extensions
Mali-G52 GPU with 6 x Execution Engines (800Mhz)
|Memory||DDR4 4GiB with 32-bit bus width. Data rate: 2640 MT/s (PC4-21333 grade)
1.2Volt low power design
|Storage||1 x eMMC connector (128GB module preinstalled ) 1 x microSD slot (DS/HS modes up to UHS-I SDR104)|
|Networking||1 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps) – Realtek RTL8211F (Ethernet transceiver)
– LED indicators
* Green LED: Activated by data traffic at 100Mbps connection
* Amber LED: Activated by data traffic at 1000Mbps connection
Optional WiFi USB adapters
|Video||1 x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID)|
|Audio||1 x Stereo Audio line-out (3.5mm jack) 1 x HDMI digital output
1 x Optional SPDIF optical output
4 x USB 3.0 Host ports (shares one single root hub)
1 x USB 2.0 OTG port for Host or Device mode. (No power input)
1 x Debug serial console (UART)
1 x Peripheral Expansion Header (40-pin, 2.54mm pitch)
– 2 x DC 5V, 2 x DC 3.3V, 1 x DC 1.8V, 8 x GND
– 1 x SPI
– 1 x UART
– 2 x I2C
– 25 x GPIO (Max)
– 2 x ADC input (10bit, 1.8V Max)
– All 3.3V I/O signal level except for ADC input at max 1.8Volt.
|Other features||On board RTC (Real Time Clock) IC keeps time up to several years with a preinstalled CR2032 battery.
8MiB SPI Flash for boot manager
IR receiver for remote controller
Built with a large passive heatsink
System LED Indicators:
– Red (PWR) – Solid light when DC power is connected
– Blue (ALIVE) – Flashing like heartbeat while Kernel is running.
Active Cooling Fan Connector (5V 2-pin)
– Connector (2-pin, 1.25mm pitch)
|Power||1 x DC jack : outer (negative) diameter 5.5mm, inner (positive) diameter 2.1mm DC 7.5V ~ 18V (up to 25W)
– DC 12V/2A power adapter is included
– IDLE : ≃ 2.2W (Performance governor)
– CPU Stress : ≃ 5.9W (@2016/2208MHz), 6.2W (@2016/2400MHz)
– Power-off : ≃ 0.2W
- All variants (except the Blue Bundle) are assembled in the USA
- Home Assistant Startup Instructions - https://www.home-assistant.io/getting-started/onboarding/