ODROID-Show 2

The ODROID-SHOW2 has been discontinued by the manufacturer. 

Please see the Vocore VoDisplay as a replacement, located here.

Despite being designed with the form-factor of the U3 in mind, the ODROID-Show 2 is an Arduino-compatible display that can be connected to and controlled by any computer with a USB port.

Use it as a portable weather station by adding the 750mAh Battery and Weather Board.

KEY FEATURES

• 2.2" TFT LCD 320x240 (64K colors)
• ATmega328P microcontroller on board
• 3 user-programmable LEDs
• 3 user-programmable switches
• USB control interface (Micro-USB plug)
• Control display with VT100/ANSI-style commands
• Works with Mac, Linux, Windows, servers and more
• Identical footprint as the U3
• Comes with spacers for stacking on top of the U3
• I2C/ADC/GPIO pins for further expansion
• Compatible with the ODROID Weather Board
• Can be powered by batteries, including standard alkaline - has a connector for ODROID's 750mAh battery built-in
• Low power consumption

SPECIFICATIONS

• ATmega328P/16MHz MCU
• 2.2" 240x320 TFT-LCD (SPI 8MHz interface)
• USB to UART host interface via on-board CP2104
• 3.7-5.5VDC input
• 60mA @ 5VDC power consumption
• 500,000bps (0.5Mbps) baud rate
• 8-none-1 serial parameters
• No hardware or software flow control
• 3.45VDC input to MCU/LCD from CP2104 on-chip voltage regulator

INCLUDES

• ODROID-Show 2 Board with 2.2" TFT LCD Module
• 4x 20mm PCB spacer (plastic)
• 4x 11mm PCB spacer (metal)
• 4x 10mm PCB spacer (plastic)
• USB 2.0 type A to micro-USB type B cable

DISCUSS

• ODROID-Show forum at http://forum.odroid.com/viewforum.php?f=88 in the "Topics" section under "Announcements"

Official

• Instructions - https://wiki.odroid.com/accessory/display/odroid-show/odroid-show
• Schematics - http://odroid.com/dokuwiki/lib/exe/fetch.php?media=en:odroid_show_sch140416.pdf