{"product_id":"zooz-800-series-z-wave-long-range-motion-dimmer-zen12-800lr","title":"Zooz 800 Series Z-Wave Long Range Motion Dimmer ZEN12 800LR","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBETA RELEASE: You may need to update the firmware on the device. It may not be fully supported by your hub at the time of purchase. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMeet the switch that does the work of three smart devices. The Zooz Motion Dimmer ZEN12 800LR combines a full-featured Z-Wave dimmer, built-in motion sensor, and ambient light (lux) sensor into a single wall switch. It automatically responds to motion, intelligently adjusts to lighting conditions, and gives you complete control over your lights and automations, all without adding separate sensors around the room.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePowered by the latest\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e800 series Z-Wave chip\u003c\/strong\u003e, the Motion Dimmer supports Z\u003cstrong\u003e-Wave Long Range\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSmartStart\u003c\/strong\u003e, and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eS2 Authenticated Security\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor faster, more reliable local control. Whether you're upgrading a bathroom, hallway, laundry room, garage, or closet, this switch makes everyday lighting smarter while reducing device clutter. \u003c\/p\u003e\n\u003ch3\u003eFEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 devices in 1: smart dimmer, motion sensor, and lux sensor\u003c\/li\u003e\n\u003cli\u003eAutomatic lighting based on occupancy and ambient light\u003c\/li\u003e\n\u003cli\u003e800 series Z-Wave with Z-Wave Long Range support*\u003c\/li\u003e\n\u003cli\u003eScene Control with multi-tap, hold, and release actions*\u003c\/li\u003e\n\u003cli\u003eSmart Bulb Mode for Philips Hue and other smart bulbs*\u003c\/li\u003e\n\u003cli\u003eSmooth LED dimming up to 150 Watts\u003c\/li\u003e\n\u003cli\u003eDirect 3-way installation with a standard mechanical switch (or virtual 3-way with 2 Zooz switches)\u003c\/li\u003e\n\u003cli\u003eHighly customizable through advanced Z-Wave settings*\u003c\/li\u003e\n\u003cli\u003eSmartStart pairing and S2 security\u003c\/li\u003e\n\u003cli\u003eDesigned and supported by Zooz with US-based technical support and a 5-year extended warranty when registered within 30 days of purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNOTE: Z-Wave hub required - sold separately. *Your smart hub \/ controller needs to support advanced settings for you to take advantage of this feature.\u003c\/p\u003e\n\u003cp\u003eThe Motion Dimmer combines:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1740\" data-start=\"1719\" data-section-id=\"1tu4b7d\"\u003eSmart Z-Wave dimmer\u003c\/li\u003e\n\u003cli data-end=\"1756\" data-start=\"1741\" data-section-id=\"szatb4\"\u003eMotion sensor\u003c\/li\u003e\n\u003cli data-end=\"1785\" data-start=\"1757\" data-section-id=\"sk7vko\"\u003eLux (ambient light) sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"2052\" data-start=\"1787\"\u003eThe built-in motion sensor detects movement up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"1853\" data-start=\"1837\"\u003e25 feet away\u003c\/strong\u003e, while the integrated lux sensor continuously monitors ambient brightness. Together, they allow your lights to react only when someone is present\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"2007\" data-start=\"2000\"\u003eand\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewhen additional lighting is actually needed.\u003c\/p\u003e\n\u003cp data-end=\"2255\" data-start=\"2054\"\u003eInstead of creating automations using multiple devices, everything happens directly from the wall switch for a cleaner installation and a more reliable smart home.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSeparate Devices\u003c\/th\u003e\n\u003cth\u003eZooz Motion Dimmer\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmart dimmer\u003c\/td\u003e\n\u003ctd\u003e✓\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotion sensor\u003c\/td\u003e\n\u003ctd\u003e✓ Built in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLux sensor\u003c\/td\u003e\n\u003ctd\u003e✓ Built in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThree devices to install\u003c\/td\u003e\n\u003ctd\u003eOne device\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMultiple batteries to replace\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeparate automations\u003c\/td\u003e\n\u003ctd\u003eEverything in one switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp class=\"PDq2pG_selectionAnchorContainer\" data-end=\"2458\" data-start=\"2304\"\u003eBy default, the Motion Dimmer turns lights on when motion is detected and switches them off after 30 seconds of inactivity. But that's only the beginning.\u003cspan class=\"PDq2pG_selectionAnchor\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-end=\"2470\" data-start=\"2460\"\u003eCustomize:\u003c\/p\u003e\n\u003cul data-end=\"2621\" data-start=\"2472\"\u003e\n\u003cli data-end=\"2492\" data-start=\"2472\"\u003eMotion sensitivity\u003c\/li\u003e\n\u003cli data-end=\"2509\" data-start=\"2493\"\u003eAuto-off delay\u003c\/li\u003e\n\u003cli data-end=\"2533\" data-start=\"2510\"\u003eNight mode brightness\u003c\/li\u003e\n\u003cli data-end=\"2549\" data-start=\"2534\"\u003eLux threshold\u003c\/li\u003e\n\u003cli data-end=\"2568\" data-start=\"2550\"\u003eMotion reporting\u003c\/li\u003e\n\u003cli data-end=\"2584\" data-start=\"2569\"\u003eLux reporting\u003c\/li\u003e\n\u003cli data-end=\"2621\" data-start=\"2585\"\u003eLED indicator color and brightness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"2780\" data-start=\"2623\"\u003eCreate bright daytime lighting, gentle nighttime illumination, or automation rules tailored to every room in your home.\u003c\/p\u003e\n\u003cp class=\"PDq2pG_selectionAnchorContainer\" data-end=\"2915\" data-start=\"2815\"\u003eDesigned specifically for lighting loads, the Motion Dimmer delivers smooth dimming performance for:\u003cspan class=\"PDq2pG_selectionAnchor\" aria-hidden=\"true\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-end=\"2987\" data-start=\"2917\"\u003e\n\u003cli data-end=\"2947\" data-start=\"2917\"\u003e\u003cstrong data-end=\"2947\" data-start=\"2919\"\u003eLED fixtures up to 150 W\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-end=\"2987\" data-start=\"2948\"\u003e\u003cstrong data-end=\"2987\" data-start=\"2950\"\u003eIncandescent lighting up to 500 W\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"3017\" data-start=\"2989\"\u003eAdditional features include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable dimming speed (ramp rate)\u003c\/li\u003e\n\u003cli\u003eRestore previous brightness after power outages\u003c\/li\u003e\n\u003cli\u003eLast brightness memory\u003c\/li\u003e\n\u003cli\u003eManual dimming from the wall\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"3320\" data-start=\"3165\"\u003e\u003cstrong data-end=\"3187\" data-start=\"3165\"\u003eFor lighting only.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDo not use with receptacles, motors, fans, fluorescent fixtures, or transformer-powered loads.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eZEN12 800LR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZ-Wave Region\u003c\/strong\u003e: US\/MX\/CA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZ-Wave Chip\u003c\/strong\u003e: 800 series with SmartStart, S2 security, and Z-Wave Long Range support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e: 120-277V AC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Loads\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003e150 W dimmable LED (\u003ca rel=\"noopener\" title=\"Learn how to use Zooz switches with smart bulbs\" href=\"https:\/\/www.support.getzooz.com\/kb\/article\/1638-how-to-use-your-zooz-light-switches-with-smart-bulbs\/\" target=\"_blank\"\u003e\u003cstrong\u003eno electrical dimming for smart bulbs!\u003c\/strong\u003e\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e500 W Incandescent\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e Do NOT connect to motors, tube lights, receptacles, or fans \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNeutral wire required\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZ-Wave Range\u003c\/strong\u003e: Up to 500 feet line of sight between the hub and the closest Z-Wave receiver module, up to 1300 feet with Z-Wave Long Range enabled (your Z-Wave hub needs to support that feature)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotion Sensor Detection:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eup to 25 ft\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e: 1.3\" deep, 1.75\" wide, 4.1\" tall with plate (2.72\" tall in the back)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e32-104° F (0-40° C)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"line-height: 1.4;\"\u003eNOTES\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: \u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eZ-Box Hub (recommended for all Zooz products)\u003c\/li\u003e\n\u003cli\u003eHome Assistant (Z-Wave JS)\u003c\/li\u003e\n\u003cli\u003eHomeSeer (Z-Wave Plus or Z-Wave JS Front End)\u003c\/li\u003e\n\u003cli\u003eHubitat (integrated)\u003c\/li\u003e\n\u003cli\u003eSmartThings Hub with custom driver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eProduct Registration:\u003c\/strong\u003e for extended warranty \u003cspan style=\"text-decoration: underline;\"\u003ehttps:\/\/www.getzooz.com\/register\/\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore installing, make sure the load does not exceed 500 W for incandescent lights or 150 W for dimmable LED's. \u003cspan\u003e \u003cstrong\u003eUse with dimmable lighting fixtures only. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCheck your wiring first to confirm that you have all the following wires present in your gang box: load (most often black), line (most often black), neutral (most often white), and ground (most often green).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIf you are not comfortable identifying the wiring and following the instructions, please hire a licensed electrician.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0218\/7704\/files\/zooz-zwlr-motion-dimmer-zen12-800lr-wiring-diagram.png?v=1784732531\" alt=\"Zooz 800 Series Z-Wave Long Range Motion Dimmer ZEN12 800LR wiring diagram\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eHere are some helpful wiring tips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMake sure the gang box you are about to install the switch has a neutral wire available - you will not be able to get the ZEN12 switch to work without a neutral wire.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUnlike regular mechanical switches, Z-Wave switches require all of the wires to be connected \u003cstrong\u003eexactly as indicated\u003c\/strong\u003e - line and load wires can never be swapped as it sometimes happens to the most experienced electricians.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to include the Zooz Motion Dimmer to your smart home network?\u003c\/strong\u003e\u003cbr\u003e1. Put your Z-Wave hub in inclusion\/pairing mode (use Z-Wave Long Range if available)\u003cbr\u003e2. Scan the SmartStart QR code on the front metal plate of the switch or tap the top button of the switch 3 times quickly to finalize the inclusion process manually\u003cbr\u003e3. A new dimmer, motion sensor, and lux sensor should appear on your hub's device list\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e NOTE: \u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eUse a dedicated diagram from the manual to wire the switch in a 3-way setting with a regular electrical switch if you are looking to control one light with 2 or 3 switches.\u003c\/p\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"Zooz","offers":[{"title":"Default Title","offer_id":54556473983255,"sku":"U0681","price":37.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1884\/2123\/files\/zooz-motion-dimmer-ZEN12-800lr_2048x_dbfec8b5-cca7-4d19-8cfd-9601a67a68db.webp?v=1785240937","url":"https:\/\/ameridroid.com\/products\/zooz-800-series-z-wave-long-range-motion-dimmer-zen12-800lr","provider":"ameriDroid","version":"1.0","type":"link"}