Don't Forget Your eMMC Reader! This eMMC comes preinstalled with an OS. However, if you wish to back up this eMMC to your computer or write a new ...
View full details
Specially-designed adapter board for improved display quality under heavy loads when connected to an ODROID-XU4/XU3. This bridge board is designed ...
View full details
KEY FEATURES Compatible with Raspberry Pi 2/3 Model B and Raspberry Pi Model B+, and the ODROID-C1+ also fits (see NOTES below). Material - ABS Co...
View full details
The Biscuit™ is an integrated module consisting of 3 dimensional motion sensor and WiFi communication module. The 3 dimensional motion sensor inclu...
View full details
ATmega328 mini module with breadboard-compatible pins (included, but not attached). KEY FEATURES Arduino-compatible 14 digital input/output pins...
View full details
Need a small and light speaker to add sound to a project? Look no further. Combined with our mini stereo amplifier, this provides sound on par with...
View full details
KEY FEATURES MMA7760FC Sensor Chip Contains capacitance MEMS accelerometer with low-pass filter, compensation 0g offset and gain errors, and ...
View full details
System console interface board for platform development and debugging. INCLUDES (1) UART Interface Board (4) 8" Female-Female Jumper Wires KEY F...
View full details
Out of stock
System console interface board for platform development and debugging. KEY FEATURES CP2104: USB to Serial UART bridge IC with 1.8V interface Molex...
View full details
Power your ODROID-C0 / C1 / C1+ / C2 / U2 / U3 / W from a USB charger or USB recharger with this cable. KEY FEATURES Inner diameter 0.8mm, outer d...
View full details
Out of stock
Tiny USB Microphone for your Single Board Computer, laptop or desktop! KEY FEATURES Advanced digital USB provides superior clarity with the simpli...
View full details
KEY FEATURES USB to IO expansion board for GPIO/PWM/SPI/UART/I2C/ADC interfaces 3.3V/5V compatible PIC18F45K50-QFN USB microcontroller is mounted ...
View full details
Add GPS Capability to your ODROID or other SBC running Linux or Android! KEY FEATURES Ublox chipset with patch antenna 50 channel u-blox engine ...
View full details
Out of stock
Do you want to add a small, lightweight portable audio output to your project? With this mini stereo audio amplifier, add one (mono) or two (stereo...
View full details
Add amplified stereo sound to your single-board computer project! KEY FEATURES Ready to assemble - no soldering required! Android and Ubuntu compa...
View full details
Short Crust Plus is the new version of the Short Crust Case designed specifically for the Raspberry Pi Model B+, the Raspberry Pi 2 Model B and the...
View full details
MicroSD cards are supported in nearly all single-board computers. This microSD module can handle all Class 10 tasks, plus provide additional speed ...
View full details
Add a battery for the real-time clock (RTC) on your ODROID / BIOS on Atomic Pi. Keep time / settings even when disconnected from power. KEY FEATUR...
View full details
Out of stock
KEY FEATURES Input Voltage: AC 100-240V 50/60Hz Output: DC 5.0V 2500mA (2.5A) Cable Length: Approx.110 cm Short Circuit Protection Overload Protec...
View full details
Out of stock
For those who want to assemble their own MC-1 Cluster or a variation, this package offers the fan, acrylic mounts and mounting hardware to make it ...
View full details
KEY FEATURES Color: Black with Yellow LED Material: Plastic and Metal Rated Load: 12V/20A Pins: 3 Warranty is valid for two weeks, starting ...
View full details
KEY FEATURES Color: Black with Yellow LED Material: Plastic and Metal Rated Load: 12V/10A (max 16A) Pins: 3 Warranty is valid for two weeks, star...
View full details
KEY FEATURES Color: Black Material: Plastic and Metal Rated Load: 12V/100mA Pins: 3 with wires attached Warranty is valid for two weeks, starting...
View full details
This reader/writer module adapts eMMC modules to be recognized by your personal computer, via USB 2.0, for the purpose of reading contents and fl...
View full details
Do you want to charge your Pinephone, or run a single-board computer in your car? This, plus an inexpensive USB power cable will allow you to do th...
View full details
Adapter for next-generation Ultra High Speed microSD/microSDHC/microSDXC cards. Warranty is valid for two weeks, starting upon date of receipt.
Out of stock
The GameSir G3w utilizes a 32-bit MCU chip, delivering computing capability of up to 48 million operations per second giving it high sensitivity a...
View full details
Build your own custom modular tablet! The pictured tablet has a green front and back. Many front/back color options available. The sides will come ...
View full details
KEY FEATURES Supported drives: M.2/NGFF Type 2230, 2240, 2260 and 2280 “M” keyed PCIe SSD card NOTES For ROCKPro64 by Pine64 Possibly compa...
View full details
Out of stock
Don't Forget Your eMMC Reader! This eMMC DOES NOT come preinstalled with an OS. If you wish to back up this eMMC to your computer or write a OS im...
View full details
Out of stock
ROCKPro64 PCIe To Dual SATA-III Interface Card Available now! KEY FEATURES Chipset: ASMedia ASM1061 Supported drives: 2.5″ SATA SSD/HDD and 3...
View full details
Swivel Camera Mount for your Smoothcam Raspberry Pi Camera Case or other standard tri-pod mount (1/4"-20) camera. Specs:Length: 3"Swivel: 360 degre...
View full details
Heatsink for ROCKPro64 Single Board Computer. Includes a Thermal Conductive pad for effective heat transfer. NOTES Does not fit inside some cases ...
View full details
The ameriDroid ROCK64/H64-B (Translucent Black or Clear) Case has openings for all the outputs on Pine64's excellent ROCK64 and H64 Model B boards,...
View full details
Based on the AMPAK AP6256 Combo Module and made specifically for the ROCKPro64 SBC. This module has fully Wi-Fi and Bluetooth 5.0 functionali...
View full details
KEY FEATURES Blue and white 16x2 character LCD Integrated I2C module for communication Adjustable LCD contrast INCLUDES (1) 16x2 LCD module and...
View full details