Out of stock
The ODROID-H2 “Case Type 3” is designed for the user who needs high bandwidth network with mid-range storage. The Type 3 case mixes the small for...
View full details
Out of stock
This is a spare mechanical parts pack for the ODROID-GO Kit. INCLUDES: (see photo) B. Front enclosure C. Back enclosure E. 4 button rubber F...
View full details
Mount your ODROID-N2+ or original N2 to your monitor with this simple 3D-Printed mounting bracket. The bracket makes mounting your N2 unit as simp...
View full details
This writer does not work with the Hardkernel eMMC Black Modules, but works fine with other eMMC modules. Easier and faster way to flash your OS im...
View full details
Add GPS Capability to your ODROID or other SBC running Linux or Android! KEY FEATURES Ublox chipset with patch antenna 50 channel u-blox engine ...
View full details
Out of stock
Replacement screen for the ODROID-GO ADVANCE.
2x20pin header socket is useful when you plug a shield on the ODROID-N2 or any other system with a 2x20 (40-pin) GPIO header when more clearance ...
View full details
Out of stock
This is a single LCD module as a spare part for the ODROID-GO kit. The display has 320x240 pixels and the communication interface is SPI. Warranty ...
View full details
The Weather Board 2 is the preferred low-cost environmental sensing solution with BME280 and Si1132 on one board. The combination of the BME280 and...
View full details
KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC 90-degree L-Type connector ...
View full details
No Net card, no space for SATA storage. Package contents: A. Top panel B. Back panel C. Front panel D. Bottom panel E. Left/Right panel F. 1 x 92m...
View full details
Net Card 2 for H-series (H3/H2 Net Card 2) The new Net Card 2 has the same physical form factor and interface method as the original Net Card, but ...
View full details
Don't Forget Your eMMC Reader! This eMMC comes preinstalled with an OS. However, if you wish to back up this eMMC to your computer or write a new ...
View full details
Replacement speaker and joystick for the ODROID-GO ADVANCE. KEY FEATURES 0.5 Watt 8 Ohm speaker Analog Joystick
KEY FEATURES Sandisk Ultra UHS-1 module Preinstalled Ubuntu Ready to run COMPATIBILITY ODROID-XU3 / XU3-Lite / XU4 / HC1 / MC1 Warranty i...
View full details
Out of stock
This VESA kit helps to mount the ODROID-H2 enclosed with the “Case TYPE 2” to your LCD TV or LCD monitor. The “Case Type 2” and this kit can be put...
View full details
Standard USB3.0AM to Micro B Cable [0253] Warranty is valid for two weeks, starting upon date of receipt.
Out of stock
This ODROID-H2 “Case Type 4” is designed for the user who needs high bandwidth network with mid-range storage. The Type 4 case provides the option ...
View full details
KEY FEATURES Breaks out stereo audio from the HDMI port to a 3.5mm (1/8 inch) jack Includes 3.5mm (1/8 inch) audio cable (not needed if using spea...
View full details
System console interface board for platform development and debugging. The major change of the USB-UART2 Kit is a Type-C Connector from Micro-USB. ...
View full details
Out of stock
This LCD displays 20 characters wide, 4 rows in white texts on blue background. It has a back-light, a contrast adjust potentiometer, and a simple ...
View full details
Out of stock
This is a spare battery pack for the ODROID-GO Kit or other devices that have the Molex 51021-0200 connector for LiPo batteries. Lithium Polymer re...
View full details
30-pin and 12-pin dual-stacking header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own sh...
View full details
Out of stock
Compatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield 2 provides stereo RCA connectors and an S/PDIF...
View full detailsSign up to get "In The Know"
Copyright © 2024 ameriDroid.