Add wireless and bluetooth 4.0 capability to your PINE A64/A64+ and SoPine! This module is made specifically for the PINE A64 and SoPine families o...
View full details
Out of stock
Compatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield 2 provides stereo RCA connectors and an S/PDIF...
View full details
Out of stock
Compatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield provides stereo RCA connectors, a 3.5mm stereo...
View full details
You're probably itching to put together some fun embedded computer projects with the ODROID-C1, ODROID-XU4 with Shifter Shield, or other SBC with R...
View full details
Fully assembled 3.2 inch 320x240 display with resistive touch overlay. Simply plug it into the SBC's 26-pin or 40-pin header. Leaves 14 pins unus...
View full details
The CSI connector on the Raspberry Pi Zero is smaller than the one on the standard-sized Raspberry Pi. This cable allows the Official Raspberry Pi ...
View full details
The Chroma C Servo Board allows control of up to eight radio-control (RC) servos or electronic speed controllers (ESC) via the GPIO pins on the C0/...
View full details
Squeezing all the performance possible out of your XU4 or U3? Operating in enclosed or harsh environments? Replace the passive heatsink with this a...
View full details
KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC NOTES Compatible with C2 /...
View full details
KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC 90-degree L-Type connector ...
View full details
KEY FEATURES Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. long (approx.) COMPATIBILITY ODROID-N2 ODROID-H2 ROCKPro64 ODR...
View full details
Adapts Hardkernel eMMC modules (64GB or smaller) to a standard microSD card connector. This allows eMMC modules to be read from and written to by ...
View full details
Picture for illustrative purposes only. Actual product may vary slightly in appearance. KEY FEATURES Convert EU-style cords and plugs to US-styl...
View full details
Perfect fan for adding DIY quiet cooling to most SBCs and enclosures. KEY FEATURES 2.54mm pitch female connectors for connecting directly to I/...
View full details
Limited Supply - Get Yours While They Last! The Banana Pro/Pi 7.0 inch touch screen LCD module connects to the LVDS/RGB/CPU display interface ...
View full details
Out of stock
The Bright Pi is a breakout/add on board for the Raspberry Pi (can be used with other I2C devices too - like most other single board computers, Ard...
View full details
KEY FEATURES Universal Bluetooth Audio Receiver Supports A2DP Stereo Profile Classic Bluetooth v2.0 support Bluetooth High Speed v3.0 support Cl...
View full details
Uninterruptible power supply (and battery backup) designed specifically for the ODROID-C1/C1+/C2, and compatible with similar SBCs like Raspberry P...
View full details
Out of stock
This USB Audio Adapter should work with any system, but requires configuration through ALSA or other sound drivers. The CM108AH is a highly integra...
View full details
KEY FEATURES Mini-USB Bluetooth dongle CSR8510 A10 Chipset Classic Bluetooth v2.0 support Bluetooth High Speed v3.0 support Bluetooth Low Energy...
View full details
Are you ready to drive a race car? The Universal Motion Joypad is a game controller that is similar to the steering wheel available for the Nintend...
View full details
The Ultrasonic Ranging Module provides stable readings and accurately measures distance. This module can be used for a number of projects such as f...
View full details
The U3 Shield Tinkering Kit is a bag of goodies to add on to the U3 IO Shield to give makers more possibilities for ODROID-connected electronics. I...
View full details
The U3 IO Shield is designed to be mounted to the U3 via spacers and connected via the 8 pin GPIO connector on the U3. It is meant as a developmen...
View full details
Recommended USB adapter for reading/writing images onto microSD and eMMC modules. Engineered to deliver super fast data transfer speeds, the RDF5 U...
View full details
KEY FEATURES Color: Silver, Red and Black with Red LED Material: PVC and Stainless Steel Rated Load: 12V/20A Pins: 3 ( + / - / LED ) Warranty is ...
View full details
Perfect fan for adding DIY quiet cooling to most SBCs and enclosures. KEY FEATURES Channels for flow acceleration Motor hub size minimized Anti-vi...
View full details
Standard USB3.0AM to Micro B Cable [0253] Warranty is valid for two weeks, starting upon date of receipt.
Out of stock
As one of the smallest systems around there are so many amazing things you could do with the Raspberry Pi if it was self-powered and portable. Int...
View full details
KEY FEATURES Laser-cut Acrylic Panels Allows installation of 3.5 Touchscreen Display Shield Colors: Clear, Smoky Blue, Smoky White Compatible with...
View full details
Out of stock
The JustBoom Raspberry Pi Amp HAT was designed to be simple to install and use. With no soldering required and all the mounting hardware already pr...
View full details
Out of stock
Harness the clarity of your high-definition music files with the JustBoom Pi Zero amplifier board. Audio the way it was meant to be heard!The Just...
View full details
Out of stock
The JustBoom Raspberry Pi DAC HAT (digital to analog converter) was designed to be simple to install and use. With no soldering required and all th...
View full details
Out of stock
The JustBoom DAC Zero pHAT is a plug and play, high resolution, digital-to-analog converter for the Raspberry Pi Zero and is by far the easiest and...
View full details
Out of stock
The JustBoom Raspberry Pi Digi HAT was designed to be simple to install and use. With no soldering required and all the mounting hardware already p...
View full details
Don't Forget Your eMMC Reader! This eMMC comes preinstalled with an OS. However, if you wish to back up this eMMC to your computer or write a new ...
View full details