VoCore2 Ultimate - Linux SBC with WiFi and Dock
VoCore2 Ultimate - Linux SBC with WiFi and Dock
VoCore2 Ultimate - Linux SBC with WiFi and Dock

VoCore2 Ultimate - Linux SBC with WiFi and Dock

Out of Stock, can be pre-ordered

Out of stock
$49.95

Disclaimer for Price Display Issues:

We strive to ensure that all prices displayed on our website are accurate. However, in rare cases, you may encounter an incorrect price for a product variant due to technical issues. If you notice a discrepancy in the price displayed when selecting a variant, please try the following steps:

  • Clear your browser cache and reload the page.
  • Use a different browser.
  • Add the variant to the cart.

The correct price will always be displayed in your cart before you complete your purchase. We apologize for any inconvenience this may cause and appreciate your understanding.

VoCore2 is a tiny single-board computer. Use it for all types of projects where tiny size, inexpensive cost and built-in WiFi are important. The VoCore2 is open hardware which runs Linux and has WiFi, USB, UART, 20+ GPIOs and more. One inch square! VoCore2 Ultimate also contains a microSD slot, USB2.0 port, A/D, D/A, 10/100 Ethernet port, audio record/playback, up to 300Mbps wireless transfer speed and low power consumption.

The VoCore2 can be used as a super tiny WiFi router!

VoCore2 is a new revision of the original VoCore v1.0, making it faster and more stable without increasing the size!

Links to compliance information available at the bottom of this listing.

KEY FEATURES

  • Approximately 1 inch cube
  • Built-in WiFi, 802.11n, 2T2R, speed up to 300Mbps
  • Built-in Antenna, U.FL slot
  • CPU: MT7628AN, 580MHz, MIPS 24K
  • Memory: 128MB DDR2 @ 166MHz
  • Storage: 16MB NOR on board, supports up to 2TB SDXC cards
  • Ethernet: 1 port / 5 ports, up to 100Mbps
  • USB 2.0 port
  • PCIe 1.1 supported
  • UART x3 (UART2 for debug console)
  • GPIO Pins: >= 40 (pinmux)
  • PWM x4
  • Runs Linux - Preloaded!
  • A/D Conversion - 4 channels
  • D/A Conversion - 1 channel
  • Audio playback and recording supported
  • Dimensions: 28 x 30 x 30 mmPower input: 3.6V ~ 6.0V
  • Power consumption: 74mA WiFi standby, 230mA WiFi full speed, 5V input

NOTES

  • Please update to the latest VoCore2 Ultimate firmware for best performance.

QUICK START

  • Attach microUSB port to a stable power source, such as a USB charger or computer USB port. DO NOT SUPPLY MORE THAN 6.0V as that will damage your VoCore2.
  • The SSID "VoCore2" should be accessible from other devices within 30 seconds of applying power.
  • Connect to the SSID "VoCore2" from your wireless device (phone, computer, laptop, tablet, ODROID, etc.)
  • Use one of the following two methods to connect:
  •     1. Open an SSH terminal ("ssh" on Linux/Android, "PuTTY" on Windows, etc.) and log in to "VoCore2" (user: root, pass: vocore)
  •     2. Using USB2TTL, you can connect to the VoCore2 through another computer's USB port (no driver required). Once connected, a serial port should show up for the VoCore2. NOTE: UART speed is 115200bps, 8bit, no parity, 1 stop bit. For Windows, USB2TTL device should appear in Device Manager. For Linux/MacOS, USB2TTL device should appear at /dev/tty.usbmodem_1

The VoCore2 is now in AP (Access Point) mode. It is possible to put the VoCore2 in AP + STA mode, which allows the VoCore2 to connect to a wireless hotspot (AP) and provide wireless access from that hotspot to anything connected to the AP and Ethernet port.

APPLICATIONS
  • NIC
  • AP/Router
  • Embedded Applications

NOTE

  • PCB may be green or white in color

LINKS

CERTIFICATIONS

Warranty is valid for thirty days, starting upon date of receipt.

You recently viewed

Clear recently viewed
x