ODROID-GO Advance (Black Edition) DIY Kit
Out of Stock, can be pre-ordered
Disclaimer for Price Display Issues:
We strive to ensure that all prices displayed on our website are accurate. However, in rare cases, you may encounter an incorrect price for a product variant due to technical issues. If you notice a discrepancy in the price displayed when selecting a variant, please try the following steps:
- Clear your browser cache and reload the page.
- Use a different browser.
- Add the variant to the cart.
The correct price will always be displayed in your cart before you complete your purchase. We apologize for any inconvenience this may cause and appreciate your understanding.
- The name for the new revision is "ODROID-Go Advance Black Edition" or "OGA-BE" for short.
- The power input port has changed to a USB Type-C connector.
- A USB Type-C cable is included by default.
- An 802.11n SDIO WiFi module is included on the PCB.
- L2 and R2 shoulder buttons added.
- Shell case is available in 2 colors: Aura Black and Clear White.
- PCB is now black (earlier revision PCB was white).
Original product information (see above for new changes):
Following up to the wildly successful ODROID-GO portable retrogaming console comes the newest portable retrogaming offering from Hardkernel, the ODROID-GO Advance!
In contrast to the OG ODROID-GO which utilized an ESP32 microcontroller as the main processor, the ODROID-GO Advance utilizes a full RockChip RK3326 SoC!
- Game Boy
- Game Boy Color
- Game Gear
- Megadrive
- Nintendo Entertainment System
- Sega Master System
- ...and more
SPECIFICATIONS
- Processor: CPU : RockChip RK3326 (Quad-Core ARM Cortex-A35 1.3GHz) GPU : Mali-G31 Dvalin
- Memory: 1GB (DDR3L 786Mhz, 32 Bits bus width)
- Storage: SPI Flash(16Mbytes Boot), Micro SD Card slot(UHS-1 Capable interface)
- Display: 3.5inch 320×480 TFT LCD (ILI9488, MIPI interface)
- Audio: Earphone Jack, 0.5Watt 8Ω Mono
- Battery: Li-Polymer 3.7V/3000mAh, Up to 10 hours of continuous game playing time
-
DC Jack:
2.5mm diameter DC plugUSB Type-C charging/data plug. - External I/O: USB 2.0 Host x 1, 10Pin port(I2C, GPIO, IRQ at 3.3Volt)
- WiFi: On-Board 802.11n SDIO
- Input Buttons: F1, F2, F3, F4, F5, F6, A, B, X, Y, Direction Pad, Left Shoulder, Right Shoulder, Left/Right Shoulder 2, Analog joystick
- Power consumption: Power consumption Game emulation: 250~500mA, Sleep mode: 5.3~5.8mA, Power off: 0.1mA
A USB Type-A Power Cable
B Top enclosure
C Bottom enclosure
D Plastic L/R trigger, X, Y, power Buttons
E Plastic D-pad, A, B Buttons
F ODROID-GO-Advance board
G 3000mAh battery
H LCD window
I I ~ VI button rubber
J D-PAD rubber
K A, B, X, Y button rubber
L battery sticker
M Analog joystick
N 320×480 TFT LCD
O 0.5W speaker
P 1.7×5 screws (7 pcs)
Q 1.7×8 screws (4 pcs)
R Driver
NOTES
- 8GB or larger microSD card is required to store the emulator and game ROMs.
- If you have any problem with your ODROID-GO-Advance, switch off ODROID-GO-Advance by holding the on/off button for about 6 seconds.
- This is a DIY kit. You will need to assemble it yourself. Be careful handling the components, as some of them are fragile!
LINKS
- Assembly Guide - https://wiki.odroid.com/odroid_go_advance/go_adv_assembling
VIDEOS
Product Announcement by ETA Prime:
Gameplay video from Hardkernel: