Home Assistant Connect AUX-2 packshot with packaging

Make the Gear You Already Own Smarter with Home Assistant Connect AUX-2

That old AV receiver, the TV that still looks great, the projector or UPS that only talks serial—plenty of perfectly good equipment gets pushed aside because it does not speak “smart home.” You do not have to throw it out to bring it into Home Assistant.

Home Assistant Connect AUX-2 is Nabu Casa’s smart home multi-tool for that job. It is built to help the gear you already own work with the rest of your setup—audio, serial control, optional Z-Wave, and Bluetooth, all in one compact device.

What Connect AUX-2 is

AUX-2 is official Home Assistant hardware from Nabu Casa. It is built for Home Assistant, runs on ESPHome, and is designed to do several jobs at once. Just plug it in, and Home Assistant’s setup wizard helps you get each feature going.

Power and data can travel over a single Power over Ethernet (PoE) cable for a clean install. If you prefer, you can power it over USB-C and use Ethernet or Wi-Fi. A Home Assistant system is required, and USB-C and Ethernet cables are sold separately—they are not in the box.

What it does—and how you might use it

Think of it as a way to make existing equipment smarter, rather than replacing it.

  • Whole-home synced audio. Stream CD-quality sound to a Hi-Fi or AV receiver through the 3.5 mm analog or optical (S/PDIF) output, in sync with the smart speakers you already have, and ready for Music Assistant. Only one audio output can be used at a time.
  • Serial control for the gear you already own. Two RS-232 ports can control a TV, receiver, or projector even in standby, plus other serial devices. The product is also a fit for things like solar setups and UPS equipment. An inexpensive USB adapter (sold separately) adds RS-485 when you need it.
  • Z-Wave where it works best. Plug in a Connect ZWA-2 (sold separately) and place that radio in a better spot in your home, instead of leaving it tucked behind your Home Assistant box.
  • A more solid Bluetooth reach. A dedicated antenna brings Bluetooth Low Energy smart home devices into Home Assistant over a stable wired connection. It can proxy up to three active connections. Bluetooth audio is not supported.

How it works with Home Assistant

Connect AUX-2 joins your Home Assistant system over the network—Ethernet or Wi-Fi. Once it is online, you add it in Home Assistant from Settings → Devices & services, and the wizard walks you through the features.

It is ready to use out of the box, but it is also built to be tinkered with. The enclosure is easy to open, it is built on ESPHome, and the bootloader is unlocked if you want to run custom firmware. Every purchase funds the development of Home Assistant, and Nabu Casa provides dedicated support and years of software updates.

Get your Connect AUX-2

If you have good equipment that just needs a smarter connection, take a look at Home Assistant Connect AUX-2 on ameridroid.com.

In the box you get the Connect AUX-2, a warranty and safety information leaflet, and a Home Assistant sticker. A Home Assistant system is required. The Connect ZWA-2, RS-485 adapter, and USB-C or Ethernet cables are sold separately.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.