JavaScript is required to view this page.
New ODROID Retrogaming Console: ODROID-Go Ultra

New ODROID Retrogaming Console: ODROID-Go Ultra

ODROID-Go Ultra is latest ODROID portable gaming console, powered by the same Amlogic S922X hexa-core Cortex-A73/A53 processor found in the ODROID-N2+. The new model also adds a 16GB eMMC flash for faster storage and increased RAM of 2GB. The OGU PCB shape is identical to the OGS, but it has a totally different circuit design and requires a heatsink to cool down its more powerful CPU. Due to the dual PMIC architecture, the charging time is slower when the battery is fully discharged. Therefore, a specially designed USB charging cable is provided with the device for faster charging. Connecting both the Type-C plug and Type-A plug to the OGU ports maximizes the charging rate.
At this moment, the reference Ubuntu 20.04.4 BSP image supports the following systems (cores), atari2600, atari5200, atari7800, atarilynx, gamegear, gb, gba, gbc, mastersystem, megadrive, nes, pcengine, pcenginecd, psx, segacd, snes, psp, mame2003, n64, dreamcast, gamecube.

Pre-order your ODROID-Go Ultra here.


Processor Amlogic S922X hexa-core processor with 4x Arm Cortex-73 cores @ up to 2.2 GHz, 2x Cortex-A53 cores @ up to 2.0 GHz, Arm Mali-G52 MP4 @ 846 MHz

Ubuntu 20.04.4 on Kernel 4.9.277 Aarch64

Modified EmulationStation front-end with Libretro, GPU accelerated OpenGL-ES on DRM-FB

Memory 2GB LPDDR4 @ 1608MHz, 32 Bits bus width
Storage 16GB eMMC Flash, MicroSD Card slot (UHS-1 capable interface)
Display 5-inch 854×480 TFT LCD (MIPI-DSI interface)
Audio 3.5mm earphone stereo jack, 0.5 Watt 8Ω Mono speaker
Battery 3.7V/4,000mAh Li-Polymer battery
6+ hours of continuous game playing time 
Power Supply

5V input, USB-C power connector: A USB-C charging Y cable with type-A is included.

Maximum drawing current: 1.5Amp

Support USB 2.0 device on the USB-C port

External I/O 1x USB 2.0 host port, 1x USB Type-C port with data support (same as used for power)
Input Buttons F1, F2, F3, F4, F5, F6, A, B, X, Y, direction pad, left shoulder, right shoulder, 2x analog joysticks, volume buttons
Wireless Optional dual-band WiFi and Bluetooth USB adapter
Power consumption Game emulation: 800 ~ 1300mA (depends on backlit brightness and type of game emulations and the wireless usage), Power off mode: <1mA
Charging time 3 ~ 4 hours when the device turns off. When you play game, it takes 6 ~ 7 hours.
Dimensions 204x86x25 mm, Weight: 299 g (8 oz)


Previous article Step-by-Step Guide: Installing Home Assistant on the ODROID-M1

Leave a comment

Comments must be approved before appearing

* Required fields