Banana Pi BPI-R4
Add to cart to pre-order
The Banana Pi BPI-R4 Router board features a MediaTek MT7988A quad-core ARM Cortex-A73 design, 4GB DDR4 RAM, 8GB eMMC, and 128MB SPI-NAND flash onboard. It includes 2x 10Gbe SFP, 4x Gbe network ports, USB3.2 port, and M.2 support for 4G/5G/NVME SSD. With 2x miniPCIe slots supporting Wi-Fi 7 NIC, it is a high-performance open-source router development board.
The MediaTek MT7988A is a leading network processing platform for wired and wireless applications, offering 36Gbps Wi-Fi 7 with tri-band connectivity (2.4 GHz, 5 GHz, and 6 GHz). It features 4 Gigabit Ethernet ports, 2 US GMII interfaces, 4 PCIe interfaces, and 2 USB 3.2 ports. The MT7988A supports fast-evolving tunneling applications with MediaTek Tunnel offload processor System (TOPS) for optimized networking performance.
KEY FEATURES
- MediaTek MT7988A (Filogic 880) quad-core Arm Corex-A73,1.8GHz processor
- 4GB DDR4
- 8GB eMMC flash
- 128MB SPI-NAND Flash
- Micro SD card slot
- 2x 10Gbe SFP slot
- 4x Gbe network port
- 1x USB3.2 slot
- 1x M.2 KEY-B slot with USB3.2/PCIe3.0 interface for 5G
- 1x M.2 KEY-M slot with PCIe3.0 1lane interface for NVME SSD
- 2x miniPCIe slots with PCIe3.0 2lane interface for Wi-Fi 7 NIC (Network Interface Card)
- 26 PIN GPIO Header for expanding application
- POE function customizable (present version not support POE function)
SPECIFICATIONS
| CPU | MediaTek MT7988A (Filogic 880) Quad-core Arm Corex-A73,1.8GHz processor |
| SDRAM | 4 GB DDR4 |
| On board Storage | MicroSD (TF) card,128MB SPI NAND, 8GB eMMC |
| GPIO | 26 Pin GPIO,some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S. |
| On board Network | 4 Port 10/100/1000Mbps Ethernet |
| SFP | 2x10G SFP |
| mini PCIE | 2x miniPCIe slots with PCIe3.0 2lane interface for BPI Wi-Fi 7 NIC (Network Interface Card) |
| M.2 interface | 1x M.2 KEY-B slot with USB3.2/PCIe3.0 interface for 5G,1x M.2 KEY-M slot with PCIe3.0 1lane interface for NVME SSD |
| USB | 1xUSB 3.2 slot |
| Buttons | Reset button,WPS botton, boot switch |
| Leds | Power status Led and RJ45 Led |
| DC Power | 12V/5.2A or 19V 3.2A(The power consumption will not exceed 10W without any peripheral equipment, and 12V/2A can be used.) |
| Sizes | 100.5x148mm |
| Weight | 250g |