JavaScript is required to view this page.

ODROID-H4 / H4+ / H4 Ultra

In Stock

$129.95
Variant

Disclaimer for Price Display Issues:

We strive to ensure that all prices displayed on our website are accurate. However, in rare cases, you may encounter an incorrect price for a product variant due to technical issues. If you notice a discrepancy in the price displayed when selecting a variant, please try the following steps:

  • Clear your browser cache and reload the page.
  • Use a different browser.
  • Add the variant to the cart.

The correct price will always be displayed in your cart before you complete your purchase. We apologize for any inconvenience this may cause and appreciate your understanding.

The ODROID H-series is growing with three brand new models.

Again, the new generation is more powerful and offers higher performance. 
It also delivers key new IO that will please many users.

Introducing the ODROID-H4, H4+ and H4 Ultra

ODROID is introducing the ODROID-H4, H4+ and H4 Ultra, which is equipped with higher performance and richer interfaces (ODROID H4 Series requires a 92x92x15mm Fan for all cases, case Type 4 uses 92x92x25mm but is included with the Type 4 Case.).

KEY FEATURES

    • Faster CPU architecture Alder Lake N vs. Jasper Lake. Plus AVX2 extensions.
    • Faster DRAM interface DDR5 4800 MT/s vs. DDR4 2933 MT/s.
    • Higher base and boost CPU frequencies and more powerful iGPU.
    • The increase from 2 to 4 SATA ports allows connection to a greater number of storage devices, ODROID-H4+ and ODROID H4 Ultra only.
    • An additional DisplayPort added allows the simultaneous use of up to 3 monitors.
    • Low cost ODROID H4 for compute and graphics applications (e.g signage, robot, factory automation,..)
    • Flagship H4 Ultra doubling the number of CPU cores, from 4 to 8 cores.
    • Dual BIOS: If the BIOS is corrupted due to a power outage during update, etc., you can boot into the backup BIOS and recover by moving the jumper next to the DC jack. This feature is only available on ODROID-H4+ and ODROID H4-Ultra.
    • The new H4 cases format has been improved so that a cooling fan can be mounted inside the case.
    • A Mini-ITX kit for seamless integration with generic ITX PC cases.

REQUIRED ITEMS (NOT INCLUDED)

      • No power supply included - 15VDC/4A power supply required
      • No RAM pre-installed - DDR5 SODIMM
        • DDR3/DDR4 is not supported
      • No eMMC Module or SSD included 
      • No case included
      • No HDMI cable included - needed to connect to a display device. Recommend HDMI2.0 cable to support 4K output

SPECIFICATIONS

      • Processor
        • Intel 4-Core N97 for ODROID-H4 and H4+
        • Intel 8-Core i3 N305 for ODROID-H4 Ultra
      • Memory
        • 1 x DDR5 SO-DIMM slots, Single Channel, up to 4800 MT/s. Note: Dual rank r2x8 are better.
        • Max memory capacity 48GB
        • DDR3/DDR4 are not supported
      • Storage
        • 1 x eMMC connector (bootable and selectable on BIOS)
        • 4 x SATA3 6Gbps
        • 1 x M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards)
      • Networking
        • 2 x 2.5 GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps) Intel I226-V
        • Supports Wake-On-Lan
        • LED indicators (Green: Link, Amber: Traffic)
      • Video
        • 2 x DisplayPort 1.2 (up to 4K@60Hz)
        • 1 x HDMI 2.0 (up to 4K@60Hz)
        • Triple simultaneous display support
      • Audio
        • 1 x Audio out (3.5mm jack)
        • 1 x Audio in (3.5mm jack)
        • 1 x SPDIF out (ALC662, HDA codec)
        • * HDMI & DP have audio output too.
      • External I/O
        • 2 x USB 3.0 Host ports
        • 2 x USB 2.0 Host ports
        • 1 x Peripheral Expansion Header (24-pin, 2.54mm pitch)
        • – 1 x DC 5V, 1 x DC 3.3V, 5 x GND
        • – 1 x UART (TXD/RXD/RTS/CTS 3.3Volt IO)
        • – 2 x I2C (SCL/SDA 3.3Volt IO)
        • – 1 x External Power Button
        • – HDMI CEC, 5VA+, D+,D- ( To use the HDMI-CEC function, an additional external adapter board must be installed )
        • – 3 x USB 2.0
      • Other features
        • Passive Heatsink
        • Dual BIOS on H4+ and H4 Ultra
        • BIOS Backup Battery
        • – Maintains system time and BIOS settings
        • Power Button
        • Reset Button
        • System LEDS Indicators:
        • – Red (PWR) – Solid light when DC power is supplied
        • – Blue (left, SLEEP) – turns off only when the system enters into suspend mode
        • – Blue (right, PMIC) – turns on only when the major power rails are working
        • – Amber (SATA) – Flashes when SATA data transfers
        • – Green (NVMe) – Flashes when NVMe data transfers
        • Active Cooling Fan Connector (12V 4-pin, PWM input + TACHO output)
        • – Active Cooling Fan is optional
        • – Connector (4-pin, 2.54mm pitch)
      • Power
        • DC jack : outer (ground) diameter 5.5mm, inner(positive) diameter 2.1mm
        • DC 14V ~ 20V
        • — DC 15V/4A power adapter is recommended if you don’t use 3.5″ HDDs
        • — DC 19V/7A power adapter is recommended if you use more than one 3.5″ SATA HDDs together
        • Power consumption:
        • — Headless Idle : 2.0 ~ 2.9 Watt
        • — Desktop GUI Idle : 4.6 ~ 6.2 Watt
        • — CPU + GPU stress test : 19 ~ 22 Watt
        • — Power-off :  0.2 Watt
        • — Suspend to RAM :  0.9 ~ 1.2 Watt

Form Factor: 120mm x 120mm x 47mm Approx.

      • A. CPU (Intel N97 or N305 )
      • B. 1 x DDR5 SO-DIMM slots (Single channel memory support)
      • C. 1 x M.2 PCI Express Module Socket (NGFF-2280)
      • D. 1 x eMMC (Embedded Multimedia-Card) Socket
      • E. 4 x SATA Power Connectors (2.5mm pitch, JST-XH compatible connector)
      • F. 4 x SATA3 6.0 Gb/s Data Connectors
      • G. 1 x DC Power Jack
      • H. 2 x USB 3.0
      • I. 2 x USB 2.0
      • J. 1 x HDMI 2.0
      • K. 2 x DisplayPort 1.2
      • L. 2 x RJ45 Ethernet Ports (10/100/1000/2500)
      • M. 5 x System LED Indicators
      • N. 1 x Peripheral Expansion Header (24-pin)
      • O. 1 x Power Switch
      • P. 1 x Reset Switch
      • Q. 1 x Backup Battery Connector (2-pin)
      • R. 1 x Active Cooling Fan Connector (4-pin)
      • S. 1 x Audio out, 1 x Audio in, 1 x SPDIF out

The monitor on the left shows the Ubuntu Desktop host OS, the one on the middle shows Windows 11 running as a guest OS, the one on the right shows Debian 13 using the hardware virtualization VT-x technology.

NOTES

    • The idle power of the H4+ and H4 Ultra models is almost identical, well below the margin of error.
    • Even when set to Unlimited Performance Mode (PL4=0), the power difference in idle state is negligible.
    • If you change the PCIe ASPM option to Auto, idle power can be reduced by about 1~2 Watt even in the Desktop GUI environment.
    • The difference in idle power between the H4 and H4+ models is approximately 0.7 to 1.5 Watt due to the external PCIe-to-SATA controller IC and the power circuitry for SATA devices.
    • Only one Ethernet cable is connected.
    • In this test, Ubuntu Desktop OS was used, and we think that power consumption could have been slightly reduced if Ubuntu Server OS had been used.
    • https://wiki.odroid.com/odroid-h4/start
ODROID

H2+  

(‘2020 Jun)

ODROID

H3  

(‘2022 Oct)

ODROID

H3+  

(‘2022 Oct)

ODROID

H4  

(‘2024 Apr)

ODROID

H4+ 

(‘2024 Apr)

ODROID

H4 Ultra  

(‘2024 Apr)

Processor
CPU (Intel) Celeron J4115 Celeron N5105 Pentium N6005 Processor N97 Processor N97 Core™ i3 Processor N305
Code name Gemini Lake Jasper Lake Jasper Lake Alder Lake-N Alder Lake-N Alder Lake-N
Launch date Q4’17 Q1’21 Q1’21 Q1’23 Q1’23 Q1’23
Microarchitecture Goldmont Plus Tremont Tremont Gracemont Gracemont Gracemont
Cores / Threads 4C4T 4C4T 4C4T 4C4T 4C4T 8C8T
Cache 4 MB 4 MB 4 MB 6 MB 6 MB 6 MB
AVX2 (Advanced Vector Extensions) No No No Yes Yes Yes
TDP 10W 10W 10W 12W 12W 15W
Single Thread Burst Frequency (GHz) 2.5 2.9  3.3 3.6 3.6 3.8
Memory
Max. Memory address space (GB) 32 64 64  48 48 48
Max. Memory Speed (MT/s) DDR4-2400 DDR4-2933 DDR4-2933 DDR5-4800 DDR5-4800 DDR5-4800
iGPU (Intel UHD Graphics)
Burst Frequency (MHz) 750 800 900 1200 1200 1250
Execution Units 12 24 32 24 24 32
Video outputs
HDMI 1 1 1 1 1 1
DisplayPort 1 1 1 2 2 2
PCIe (via NVMe slot)
Generation Gen 2 Gen 3 Gen 3 Gen 3 Gen 3 Gen 3
Lanes 4 4 4 4 4 4
Compatibility with optional 

4-ports 2.5GbE

Net Card

Yes Yes Yes Yes Yes Yes
IO ports
USB 2.0 2 ports 2 ports 2 ports 2 ports 2 ports 2 ports
USB 3.0 2 ports 2 ports 2 ports 2 ports 2 ports 2 ports
2.5GbE 2 ports 2 ports 2 ports 1 port 2 ports 2 ports
SATA III 2 ports 2 ports 2 ports No 4 ports 4 ports
24pin IO Expansion ports I2C x 2 I2C x 2 I2C x 2 I2C x 2 I2C x 2 I2C x 2
USB 2.0 x 1 USB 2.0 x 3 USB 2.0 x 3 USB 2.0 x 3 USB 2.0 x 3 USB 2.0 x 3
UART x 2 UART x 1 UART x 1 UART x 1 UART x 1 UART x 1
HDMI-CEC x 1 HDMI-CEC x 1 HDMI-CEC x 1 HDMI-CEC x 1 HDMI-CEC x 1 HDMI-CEC x 1
Ext. Power Button x 1 Ext. Power Button x 1 Ext. Power Button x 1 Ext. Power Button x 1 Ext. Power Button x 1 Ext. Power Button x 1
Others
Optional Cooling Fan 92 mm 5 Volt

mini 4pin connector

92-25 mm 12 Volt

standard PC 4-pin

92-25 mm 12 Volt

standard PC 4-pin

Slim 92-15 or thick 92-25 mm 12 Volt

standard PC 4-pin

Slim fan fits inside the new cases.

Slim 92-15 or thick 92-25 mm 12 Volt

standard PC 4-pin

Slim fan fits inside the new cases.

Slim 92-15 or thick 92-25 mm 12 Volt

standard PC 4-pin

Slim fan fits inside the new cases.

Dimensions 110x110mm (4.3×4.3 in) 110x110mm (4.3×4.3 in) 110x110mm (4.3×4.3 in) 120x120mm (4.7×4.7 in) 120x120mm (4.7×4.7 in) 120x120mm (4.7×4.7 in)
Recommended Power Supply 1 60W 60W 60W 60W 60W 60W
Recommended Power Supply 2
for supporting booting
with 3.5″ hard disks
133W 133W 133W 133W 133W 133W
Unlimited Performance Mode No Yes Yes Yes Yes Yes
Security (TPM 2.0) Couldn’t be supported fTPM enabled

(Will run Windows 11 out of the box)

Hardkernel H-series cases DIY assembly

Translucent Blue Acrylic

DIY assembly

The cases are made of solid and sturdy PCBs.

DIY assembly

The cases are made of solid and sturdy PCBs.

A classic GameCube-style case will be released in May or June separately.

Certifications FCC/CE/KC/RoHS FCC/CE/KC/RoHS FCC/CE/KC/RoHS FCC/CE/KC/RoHS FCC/CE/KC/RoHS FCC/CE/KC/RoHS

 VIDEOS

You recently viewed

Clear recently viewed
U0096

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Matthew Herzog
Wicked good.

This ultra low-power x86_64 runs proxmox beautifully. Build quality and CMOS/BIOS are superb. I've only been in possession of the unit for a week so I can't speak to its durability.

R
Raymond Mugambi
The only ODROID-H4+ in Africa!

Nice upgrade from my ODROID-H2+ from 2019. Thanks to AmeriDroid I was able to forward-ship to Kenya.

x