PINE A64 7in. LCD Touchscreen (1024X600)
In Stock
Disclaimer for Price Display Issues:
We strive to ensure that all prices displayed on our website are accurate. However, in rare cases, you may encounter an incorrect price for a product variant due to technical issues. If you notice a discrepancy in the price displayed when selecting a variant, please try the following steps:
- Clear your browser cache and reload the page.
- Use a different browser.
- Add the variant to the cart.
The correct price will always be displayed in your cart before you complete your purchase. We apologize for any inconvenience this may cause and appreciate your understanding.
This 7-inch Touchscreen for the Pine A64 1GB * gives users the ability to create all-in-one, integrated projects such as tablets, game consoles, infotainment systems and embedded systems.
KEY FEATURES
- 7″ LCD Touch Screen Panel Active Matrix
- 1024 x 600 Resolution with 24 Chip LED backlight
- FFC Adapter
- Driver Method: a-si TFT active matrix
- Display mode: FFS (Normally black)
- Dot pitch: 0.1506mm(H) × 0.1432mm(V)
- Active area: 154.21mm(H) × 85.92mm(V)
- Panel size: 163.9mm(H) × 97.1mm(V) × 2.6mm(T)
- Color: RGB vertical stripe
- Ribbon Cable: 3.5″ (8.89 cm)
NOTES
- * Not compatible with A64 512MB model as it does not have a DSI connector
- Armbian users: If you clone an Armbian installation for more than one Pine A64, please keep in mind that the Ethernet MAC address will be chosen randomly on first boot and then saved in /boot/uEnv.txt. To avoid MAC address collisions, you must adjust the address there or delete the whole ethaddr line
- Armbian users: If you use a DVI display don’t forget to define
disp_dvi_compat=1in/boot/armbianEnv.txt(supported starting with 5.21) - Armbian users: Pine64’s own LCD with touchscreen support can simply be activated in
/boot/armbianEnv.txtby settingpine64_lcd=onand addinggt9xxf_tsto/etc/modules, followed by a reboot - The only LED on the board is a power LED which turns on as soon as power is available, and does not indicate anything else
- DC-IN via microUSB: Keep in mind that most USB cables have a resistance way too high which leads to undervoltage situations. It is recommended to power the Pine64(+) through the Euler pins (see linux-sunxi wiki for details)
- Armbian users: As of Summer 2019, it has been stated that only older Armbian releases (kernel 3.10) support this LCD panel. The newer mainline releases do not yet support the LCD panel. Changes need to be made to /etc/modules and /boot/armbianEnv.txt to enable the LCD
- Hardware Installation Guide - http://files.pine64.org/doc/guide/PINE64_7_inches_LCD_Touch_Screen_Panel_Installation_Guide.pdf
Warranty is valid for two weeks, starting upon date of receipt.