LED Power Button

Blue illuminated Power Button for the ODROID-H2 with pre-assembled jumper wires. There is a small power switch on the ODROID-H2 board. But it is not easy to access the switch when you assemble(place?) the board in to a case. This beautifully illuminated power button is a good solution what you need! This button can be mounted on the official acrylic case Type-1, Type-2, Type-3 and Type-4.

Red wire: LED positive (Anode) : pin-4 or pin-14 on 24 pin header of ODROID-H3/H4 (Warning: pin-14 will always make the LED turns on even in the power-off state)
Black wire: LED negative (Cathode) : GND(pin-1) on 24 pin header of ODROID-H3/H4
Green wire : Switch-A : #PWR_BTN(pin-17) in 24 pin header of ODROID-H3/H4
Blue wire : Switch-B: GND(pin-19) on 24 pin header of ODROID-H3/H4

Warranty is valid for two weeks, starting upon date of receipt.