Stereo Boom Bonnet (Amp + Speakers)
Add amplified stereo sound to your single-board computer project! KEY FEATURES Ready to assemble - no soldering required! Android and Ubuntu compa...
View full detailsAdd amplified stereo sound to your single-board computer project! KEY FEATURES Ready to assemble - no soldering required! Android and Ubuntu compa...
View full detailsAdd a full-HD (1920x1080) color camera to your VoCore! KEY FEATURES Resolution: 1920x1080 Codecs: H.264, MJPEG Up to 30fps @ 1920x1080 (may be slo...
View full detailsCompatible with any computer with a 26- or 40-pin header like the C1+, XU4 with Shifter Shield, Banana series, or Raspberry Pi. What's better than ...
View full details3.5mm male to male audio cable KEY FEATURES Male to male audio cable 4-conductor (ground, left, right, mic) Works for mono, stereo and stereo...
View full detailsThe U3 Shield Tinkering Kit is a bag of goodies to add on to the U3 IO Shield to give makers more possibilities for ODROID-connected electronics. I...
View full detailsKEY FEATURES No Load Running Speed: 0.14sec/60° at 4.8V, 0.12sec/60° at 6V Torque Force: 1.3kg/cm at 4.8V, 1.5kg/cm at 6V Size : 23 x 12.2 x 29mm...
View full detailsSpecially-designed adapter board for improved display quality under heavy loads when connected to an ODROID-XU4/XU3. This bridge board is designed ...
View full detailsNeed a small and light speaker to add sound to a project? Look no further. Combined with our mini stereo amplifier, this provides sound on par with...
View full detailsATmega328 mini module with breadboard-compatible pins (included, but not attached). KEY FEATURES Arduino-compatible 14 digital input/output pins...
View full detailsThe Teensy is a complete USB-based microcontroller development system, in a very small footprint, capable of implementing many types of projects. ...
View full detailsAdd-on for 2x13 or 2x20 2.5mm pitch SBCs (single-board computers) like Raspberry Pi2 and ODROID-C1+. For creation of circuits to use with compatibl...
View full detailsKEY FEATURES No Load Running Speed: 0.12sec/60° at 4.8V Size : 23 x 12.2 x 29mm Weight: 9g Gear/Case Type: Plastic/Plastic Interface Type: Compat...
View full detailsAdd wireless and bluetooth 4.0 capability to your PINE A64/A64+ and SoPine! This module is made specifically for the PINE A64 and SoPine families o...
View full details30-pin and 12-pin header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own shield for the O...
View full detailsKEY FEATURES White Case and Cable USB 2.0 4x USB2.0 ports 480Mbps maximum transfer rate 2.60 x 0.87 x 0.75 in. (6.6 x 2.2 x 1.9 cm) 0.78 oz (22g) ...
View full details30-pin and 12-pin dual-stacking header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own sh...
View full detailsThe K18 multimedia wireless keyboard is designed to be used as a remote keyboard with complete input and control capabilities for single-board comp...
View full detailsThe SmartPower2 power supply not only provides 4-5.3VDC output at up to 5A, but also has WiFi connectivity built-in to allow monitoring power utili...
View full detailsThe Chroma C Servo Board allows control of up to eight radio-control (RC) servos or electronic speed controllers (ESC) via the GPIO pins on the C0/...
View full detailsAdd a microphone to systems that have a 3.5mm microphone jack. KEY FEATURES Material: PVC + metal 3.5mm jack Sensitivity: -28 +/-3dB Frequency ran...
View full detailsKEY FEATURES MPU-6050 Sensor Chip Contains MEMS accelerometer & gyro in a single chip - captures x, y and z channels simultaneously 3~5VDC IIC...
View full detailsThe U3 IO Shield is designed to be mounted to the U3 via spacers and connected via the 8 pin GPIO connector on the U3. It is meant as a developmen...
View full detailsNeed a small and light speaker to add sound to a project? Look no further. Combined with our mini stereo amplifier, this provides sound on par or b...
View full detailsCompatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield provides stereo RCA connectors, a 3.5mm stereo...
View full detailsSign up to get "In The Know"
Copyright © 2024 ameriDroid.