This writer does not work with the Hardkernel eMMC Black Modules, but works fine with other eMMC modules. Easier and faster way to flash your OS im...
View full details
Add GPS Capability to your ODROID or other SBC running Linux or Android! KEY FEATURES Ublox chipset with patch antenna 50 channel u-blox engine ...
View full details
Out of stock
Replacement screen for the ODROID-GO ADVANCE.
2x20pin header socket is useful when you plug a shield on the ODROID-N2 or any other system with a 2x20 (40-pin) GPIO header when more clearance ...
View full details
Out of stock
This is a single LCD module as a spare part for the ODROID-GO kit. The display has 320x240 pixels and the communication interface is SPI. Warranty ...
View full details
The Weather Board 2 is the preferred low-cost environmental sensing solution with BME280 and Si1132 on one board. The combination of the BME280 and...
View full details
No Net card, no space for SATA storage. Package contents: A. Top panel B. Back panel C. Front panel D. Bottom panel E. Left/Right panel F. 1 x 92m...
View full details
Don't Forget Your eMMC Reader! This eMMC comes preinstalled with an OS. However, if you wish to back up this eMMC to your computer or write a new ...
View full details
Net Card 2 for H-series (H3/H2 Net Card 2) The new Net Card 2 has the same physical form factor and interface method as the original Net Card, but ...
View full details
Out of stock
Replacement speaker and joystick for the ODROID-GO ADVANCE. KEY FEATURES 0.5 Watt 8 Ohm speaker Analog Joystick
KEY FEATURES Sandisk Ultra UHS-1 module Preinstalled Ubuntu Ready to run COMPATIBILITY ODROID-XU3 / XU3-Lite / XU4 / HC1 / MC1 Warranty i...
View full details
Out of stock
This VESA kit helps to mount the ODROID-H2 enclosed with the “Case TYPE 2” to your LCD TV or LCD monitor. The “Case Type 2” and this kit can be put...
View full details
Standard USB3.0AM to Micro B Cable [0253] Warranty is valid for two weeks, starting upon date of receipt.
Out of stock
This ODROID-H2 “Case Type 4” is designed for the user who needs high bandwidth network with mid-range storage. The Type 4 case provides the option ...
View full details
KEY FEATURES Breaks out stereo audio from the HDMI port to a 3.5mm (1/8 inch) jack Includes 3.5mm (1/8 inch) audio cable (not needed if using spea...
View full details
System console interface board for platform development and debugging. The major change of the USB-UART2 Kit is a Type-C Connector from Micro-USB. ...
View full details
Out of stock
This LCD displays 20 characters wide, 4 rows in white texts on blue background. It has a back-light, a contrast adjust potentiometer, and a simple ...
View full details
30-pin and 12-pin dual-stacking header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own sh...
View full details
Out of stock
Compatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield 2 provides stereo RCA connectors and an S/PDIF...
View full details
30-pin and 12-pin header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own shield for the O...
View full details
No Net card and space for 2 x 2.5” SATA drives (max. 15mm thick). Package contents: A. Top panel B. Rear panel C. Front panel D. Bottom panel E. I...
View full details
Add amplified stereo sound to your single-board computer project! KEY FEATURES Ready to assemble - no soldering required! Android and Ubuntu compa...
View full details
KEY FEATURES Laser-cut Acrylic Panels Allows installation of 3.5 Touchscreen Display Shield Colors: Clear, Smoky Blue, Smoky White Compatible with...
View full details
Don't Forget Your eMMC Reader! This eMMC comes preinstalled with an OS. However, if you wish to back up this eMMC to your computer or write a new ...
View full details
Fully assembled 3.2 inch 320x240 display with resistive touch overlay. Simply plug it into the SBC's 26-pin or 40-pin header. Leaves 14 pins unus...
View full details
Uninterruptible power supply (and battery backup) designed specifically for the ODROID-C1/C1+/C2, and compatible with similar SBCs like Raspberry P...
View full details
KEY FEATURES Sandisk Ultra UHS-1 Module Preinstalled Ubuntu Ready to run NOTE See picture for demonstration of how to install COMPATIBILIT...
View full details
Compact, cost-effective, simple, and still high-performance SBC. Smaller and neater form factor: 69 x 56mm Small size allows for mounting inside ...
View full details
You're probably itching to put together some fun embedded computer projects with the ODROID-C1, ODROID-XU4 with Shifter Shield, or other SBC with R...
View full details
Out of stock
Compatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield provides stereo RCA connectors, a 3.5mm stereo...
View full details
Out of stock
This module is the 16 way GPIO expander for the I2C interface, and built with the MCP23017. MCP23017 has a high-speed I2C interface which supports ...
View full details
No Net card and space for 2 x 3.5” SATA drives. Package contents: A. Cooling fan panel B. Side panel C. Top panel D. Side lock piece E. Rear panel...
View full details
You need this part to use a USB-UART Module Kit. The 4 pin connector holes, located at [F] on the PCB board and you need to SOLDER the 4 pin connec...
View full details
Don't Forget Your eMMC Reader! This eMMC comes preinstalled with an OS. However, if you wish to back up this eMMC to your computer or write a new ...
View full details
Out of stock
For those who want to assemble their own MC-1 Cluster or a variation, this package offers the fan, acrylic mounts and mounting hardware to make it ...
View full details
This item is built to order, and therefore subject to the availability of the XU4Q and the OGST Gaming Console Case. If either are out of stock, ...
View full details
KEY FEATURES Sandisk Ultra UHS-1 module Preinstalled Android Ready to run NOTE See picture for demonstration of how to install COMPATIBIL...
View full details
Out of stock
KEY FEATURES USB to IO expansion board for GPIO/PWM/SPI/UART/I2C/ADC interfaces 3.3V/5V compatible PIC18F45K50-QFN USB microcontroller is mounted ...
View full details
With this CoreELEC kit, you'll receive everything you need to set up your own customizable media center. Connect it to your big screen TV, projecto...
View full details
Out of stock
The SmartPower2 power supply not only provides 4-5.3VDC output at up to 5A, but also has WiFi connectivity built-in to allow monitoring power utili...
View full details
Don't Forget Your eMMC Reader! This eMMC comes preinstalled with an OS. However, if you wish to back up this eMMC to your computer or write a new ...
View full details
Space for Net card and 2 x 2.5” SATA drives (max. 15mm thick). Package contents: A. Top panel B. Rear panel C. Front panel D. Bottom panel E. Inne...
View full details
The ODROID H-series is growing with three brand new models. Again, the new generation is more powerful and offers higher performance. It also deliv...
View full details
Don't Forget Your eMMC Reader! This eMMC comes preinstalled with an OS. However, if you wish to back up this eMMC to your computer or write a new ...
View full details
Space for Net card and 2 x 3.5” SATA drives. Package contents: A. Cooling fan panel B. Side panel C. Top panel D. Side lock piece E. Rear panel F....
View full details
This shield is perfect for building stand-alone projects with an inexpensive user interface. The 2 buttons allow basic control. The 7 LEDs can be...
View full details
KEY FEATURES Blue and white 16x2 character LCD Integrated I2C module for communication Adjustable LCD contrast INCLUDES (1) 16x2 LCD module and...
View full details