ODROID

Add Gigabit Ethernet capability to your USB3.0-equipped ODROID with this adapter.  USB2.0-equipped SBCs will run at a slower speed. Picture is for ...

Fully assembled 3.2 inch 320x240 display with resistive touch overlay.  Simply plug it into the SBC's 26-pin or 40-pin header.  Leaves 14 pins unus...

No Net card and space for 2 x 3.5” SATA drives. Package contents: A. Cooling fan panel B. Side panel C. Top panel D. Side lock piece E. Rear panel...

Uninterruptible power supply (and battery backup) designed specifically for the ODROID-C1/C1+/C2, and compatible with similar SBCs like Raspberry P...

You're probably itching to put together some fun embedded computer projects with the ODROID-C1, ODROID-XU4 with Shifter Shield, or other SBC with R...

Compatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield provides stereo RCA connectors, a 3.5mm stereo...

This is a kit that adapts the form factor so that the H4 board can be mounted on a Mini-ITX case for a desktop PC or a DIY-NAS. INCLUDES The base ...

The oCam supports plug-and-play and is UVC compliant adapting the standard M12 lens with a focal length of 3.6mm. Direct memory access via USB 3.0 ...

This module is the 16 way GPIO expander for the I2C interface, and built with the MCP23017. MCP23017 has a high-speed I2C interface which supports ...

You need this part to use a USB-UART Module Kit. The 4 pin connector holes, located at [F] on the PCB board and you need to SOLDER the 4 pin connec...

For those who want to assemble their own MC-1 Cluster or a variation, this package offers the fan, acrylic mounts and mounting hardware to make it ...

This item is built to order, and therefore subject to the availability of the XU4Q and the OGST Gaming Console Case. If either are out of stock, ...

Space for Net Card and 4 x 3.5” SATA drives. The hole for the Net Card is user-configurable: use a cutter to separate it from the rear panel. This ...

KEY FEATURES USB to IO expansion board for GPIO/PWM/SPI/UART/I2C/ADC interfaces 3.3V/5V compatible PIC18F45K50-QFN USB microcontroller is mounted ...

No Net card and space for 1 x 3.5” SATA drive or 2 x 2.5” SATA drives. Package contents: A. Top panel B. Rear-top panel C. Rear panel D. Front pan...

Replacement board for the ODROID-GO ADVANCE.

With this CoreELEC kit, you'll receive everything you need to set up your own customizable media center. Connect it to your big screen TV, projecto...

The SmartPower2 power supply not only provides 4-5.3VDC output at up to 5A, but also has WiFi connectivity built-in to allow monitoring power utili...

Space for Net card and 2 x 2.5” SATA drives (max. 15mm thick). Package contents: A. Top panel B. Rear panel C. Front panel D. Bottom panel E. Inne...