ODROID-M1
Original price
$84.95
-
Original price
$104.95
Original price
$84.95
$84.95
-
$104.95
Current price
$84.95
Availability:
In-Stock
Availability:
In-Stock
Check out the new ODROID-M1S as well!
KEY FEATURES
- Ideal choice for industrial applications due to guaranteed 15-year availability of key component
- Wide range of connectivity options
- M.2 NVMe for SSDs and PCIe applications
- Dual display capability
- CSI camera support
- USB3 ports are on their own individual controllers (not shared)
- Built-in SATA support
- 3 different audio-out options for a variety of applications
SPECIFICATIONS
| Form Factor | Board Dimensions: 90mm x 122mm x 16mm Heatsink Dimensions: 100mm x 123mm x 19mm Weight: 253 g including heatsink |
|---|---|
| Processor |
Rockchip RK3568 Processor |
| NPU | 0.8Tops@INT8, integrated high-performance AI accelerator RKNN NPU Supports one-click switching of Caffe/TensorFlow/TFLite/ONNX/PyTorch /Keras/Darknet |
| Memory | 4 or 8GiB LPDDR4 with 32-bit bus width Data rate: 3120 MT/s, up to 1,560MHz |
| Storage | 1 x eMMC slot 1 x Micro SD slot (DS/HS mode up to UHS-I SDR104) 1 x NVME M.2 SSD (PCIe 3.0 x 2) 1 x SATA3.0 |
| Networking | 1 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps) Realtek RTL8211F (Ethernet transceiver) LED indicators: Green LED: Flashing by data traffics at 100Mbps connection Amber LED: Flashing by data traffics at 1000Mbps connection |
| Video | 1 x HDMI 2.0 (up to 4K@60Hz with HDR, EDID) 1 x MIPI-DSI (works with 800 x 1280 LCD) |
| Audio | 1 x 3.5mm phone jack 1 x mono speaker output 1 x HDMI sound |
| External I/O | 2 x USB 2.0 host port 2 x USB 3.0 host port (or 1 x USB 3.0 host + 1 x USB 2.0 OTG port) 1 x Debug serial console (UART, 1.5Mbps N81) 1 x SATA Connector 1 x MIPI-CSI Camera Interface (15 pin) 1 x MIPI-DSI LCD Interface (31 pin) 1 x DSI |
| Other features | IR receiver for remote controller RTC and backup battery holder (to keep time and date for several months without main power input) System LED Indicators: Red (POWER) – Solid light when DC power is connected Blue (ALIVE) – Flashing “heartbeat” while Kernel is running. Solid On when in the u-boot stage. |
| Power | 1 x DC jack: outer (negative) diameter 5.5mm, inner (positive) diameter 2.1mm DC input: 12V ~ 15.5V DC 12V/2A power adapter is recommended IDLE: ≃ 1.25W CPU Stress: ≃ 4.44W (Performance governor) Power Off: ≃ 0W |
SOLD SEPARATELY
- Power supply
-
microSD and eMMC card - eMMC memory is much faster than microSD memory (eMMC Linux, eMMC Android)
- Metallic Case
- Coin cell battery
- HDMI cable - needed to connect to a display device. Recommend HDMI2.0 cable to support 4K output
- USB-UART module highly recommended for developers (tinkering with u-boot, kernels, multiple installs and more)
NOTES
- 3.5" SATA drives cannot draw power from the M1 directly due to technical considerations. In order to power a 3.5" SATA drive, please use an additional power supply like this one: 12V/2A SATA Power Supply
- The Official Metal Case does not have enough clearance to be used at the same time as the M1 SATA Mount and Cable Kit
VIDEOS
ETA Prime First look
Dual display demo on Android 11
SKU G0737