JavaScript is required to view this page.
Skip to content
Get 50% OFF 2x Smart Devices with your HA Yellow Kit + CM4
Get 50% OFF 2x Smart Devices with your HA Yellow Kit + CM4

eMMC Module No OS preinstalled (Orange Dot)

Save $29.00 Save $7.00
Original price $20.95
Original price $20.95 - Original price $78.95
Original price $20.95
Current price $13.95
$13.95 - $59.95
Current price $13.95
Price: $13.95
Availability:
In-Stock
Availability:
In-Stock
Availability:
In-Stock
Availability:
In-Stock
Availability:
In-Stock
Availability:
In-Stock

Don't Forget Your eMMC Reader!

This eMMC does not come preinstalled with an OS. However, if after putting data on this eMMC you wish to back it up to a non-eMMC-equipped computer or write a new OS image to it using a non-eMMC-equipped computer, you'll need a way to hook it up with one of the two following solutions:

KEY FEATURES

  • Tested with OS image at the factory, but then formatted to be blank

eMMC storage performance
Sequential read and write speed is over 150MB/s and 125MB/s respectively.
4K random access performance is reasonably fast too. io zone test result are as follows.

Click image to enlarge

*WiKi : https://wiki.odroid.com/accessory/emmc/emmc

*Schematics : http://dn.odroid.com/eMMCModule/

Warranty is valid for two weeks, starting upon date of receipt.

 

You need eMMC Module Reader or USB3.0 eMMC Module Writer to flash or update the OS of the eMMC Module.(sold separately)

Transcend USB multi-slot SD Card reader in the below picture is not included.

** USB3.0 eMMC Module Writer Works with ODROID Orange, Red and Blue eMMC modules

(It is not compatible with the Black eMMC Modules)

SKU B0882
Size: 8GB

Customer Reviews

Based on 2 reviews
50%
(1)
0%
(0)
0%
(0)
0%
(0)
50%
(1)
A
Alex Miler
Unable to install Home Assistant HAOS

After flashing the image, system tries to boot but gets stuck in "serverip" not assigned. Checked on the web - seems related to some MCC modules. Waited full two weeks for shipment and now, I still do not have working system

Based on feedback from Alex, we found that the issue is specific to HAOS, as the eMMC works correctly with other images.

After receiving the unit back, we successfully used it and flashed OS's that the customer was previously unable to flash. This suggests there may be another factor contributing to the issues experienced.

o
odark3ty
Works fine

Installed on an odroid H3 as a secondary drive and it just shows up as 3 blank partitions (two for boot). No issues.

Glad to hear it's working properly. Thanks for sharing your experience.
If you every have any questions or need further assistance, feel free to reach out to us anytime!

Nathan Ortiz
Customer Success at ameriDroid

x