ODROID-Go Super

$112.80
Select the "Starter Bundle Size" option, and we'll preimage the microSD with our favorite OGS retro gaming system, and we'll also include a USB-C power supply (US Plug), USB-C Cable, and WiFi Module!

Use coupon code OGS-STARTER at checkout for $10 off any of the bundles!

The ODROID-GO Super (OGS) is an upgraded version of the very popular ODROID-Go Advance retrogaming handheld. The LCD size has been increased from 3.5 inches to a 5 inch tempered glass display, and the resolution has been increased from 320x480 to 854×480 pixels. The battery has been increased from 3000mAh to 4000mAh allowing continuous gameplay for hours.


The OGS is pre-assembled at the factory instead of being a DIY kit. Support for faster USB WIFI+BT has also been improved. The micro-SD card slot has been changed from a friction design to push-push (spring eject).


An 8GB or higher capacity microSD card is required to install the operating system and games. Select a Starter Bundle option to get a microSD preimaged with the operating system.

SPECIFICATIONS

Processor CPU : RockChip RK3326(Quad-Core ARM 64bit Cortex-A35 1.3GHz)
GPU : Mali-G31 MP2
OS Ubuntu 18.04. 19.10 and 20.04 on Kernel 4.4 Aarch64
Modified EmulationStation front-end with Libretro. GPU accelerated OpenGL-ES on DRM-FB
Memory 1GB (DDR3L 786Mhz, 32 Bits bus width)
Storage SPI Flash(16Mbytes Boot), Micro SD Card slot(UHS-1 Capable interface)
Display 5inch 854×480 TFT LCD (Wide viewing angle display, MIPI-DSI interface)
Audio Earphone stereo jack, 0.5Watt 8Ω Mono speaker
Battery Li-Polymer 3.7V/4000mAh(76.5×54.5×7.5mm(L*W*T)), Up to 10 hours of continuous game playing time
DC Jack 5V input, USB-C power connector : A USB -C charging cable is included in the package.
Maximum drawing current: 1.5Amp

External I/O USB 2.0 Host x 1, 10Pin port(I2C, GPIO, IRQ at 3.3Volt)
Input Buttons F1, F2, F3, F4, F5, F6, A, B, X, Y, Direction Pad, Left Shoulder, Right Shoulder, Left Shoulder2, Right Shoulder2, Analog joystick, Analog joystick2
Wireless Optional USB WiFi adapter
Power consumption Game emulation: 350 ~ 600mA (depends on backlit brightness and type of game emulations and the wireless usage), Power off mode: <1mA
Charging time 3.4 ~ 4 hours when the device turns off. When you play game, it takes 4.5 ~ 5.5 hours.
Dimensions 204x86x25 mm, Weight: 280 g (10 oz)

 

Header P2 Description

 

Pin # GPIO Type Function Sysfs #
1 GND POWER
2 GPIO3_C1 IN/OUT I2S_MCLK #
3 GPIO3_C2 IN/OUT I2S_LRCKTX #
4 GPIO3_C3 IN/OUT I2S_SCLKTX #
5 GPIO3_C4 IN/OUT I2S_SDO0 #
6 3.0V POWER
7 GPIO3_C5 IN/OUT I2S_SDI1 #
8 GPIO3_C6 IN/OUT #
9 GPIO3_C7 IN/OUT #
10 5.0V POWER

 

NOTES

  • The ODROID-Go Super can be forced to power off by pushing the on/off button for about 6 seconds.
  • There are minor changes as of 29th of July, 2021. The size of analog joysticks are bigger and the color of black buttons are changed to gray.

LINKS

VIDEOS


En Español:


Overview video of EmuElec - including installation


Review from ETA Prime


Installation video (for ODROID-Go Advance which is identical except make sure to use an ODROID-Go Super image instead of the ODROID-Go Advance image)

Customer Reviews

Based on 9 reviews Write a review

You recently viewed

Clear recently viewed
x