Teensy 3.6 USB Board
The Teensy USB Development Board is a complete USB-based microcontroller development system, in a very small footprint, capable of implementing many types of projects. All programming is done via the USB port. No special programmer is needed, only a standard "Micro-B" USB cable and a computer with a USB port.
Version 3.6 features a 32 bit 180 MHz ARM Cortex-M4 processor with floating point unit. All digital and analog pins are 3.3 volts. Do not apply more than 3.3V to any signal pin.
To use the Teensy on a breadboard, you will need to add the optional header pins. The Teensy can also be run from the +5VDC on a USB cable.
All Teensy boards are shipped assembled and fully tested.
- USB can be any type of device
- 32 bit 180 MHz ARM Cortex-M4 @180
- Single push-button programming
- Easy to use Teensy Loader application
- Free software development tools
- Works with Linux, Mac OS X and Windows
- Tiny size, perfect for many projects
- Very low cost
- 1.4 x 0.7 in.
- Processor: MK66FX1M0VMD18 Cortex-M4F
- Rated Speed: 180 MHz
- Overclockable: 240 MHz
- Flash Memory: 1024 kbytes
- RAM Memory: 256 kbytes
- EEPROM: 4096 bytes
- I/O: 58 pins, 3.3VDC ONLY
- Analog In: 25 pins
- PWM: 22 pins
- I2C: 4 ports
- SPI: 3 ports
- Teensy Discussion/Support Forum - http://forum.pjrc.com/forum.php
- Teensy Forum - https://forum.pjrc.com/forum.php
- WinAVR C compiler - http://winavr.sourceforge.net/
- Teensyduino add-on for Arduino IDE - http://pjrc.com/teensy/teensyduino.html
- Simplified USB Examples - http://pjrc.com/teensy/usb_debug_only.html
- Dean Camera's LUFA Library - http://www.fourwalledcubicle.com/LUFA.php
Warranty is valid for thirty days, starting upon date of receipt.