Zooz 800 Series Z-Wave Long Range Smart Plug US ZEN04 800LR



  • On/off Z-Wave control for floor lamps & small appliances (do NOT use with transformers, humidifiers, fan motors over 1/3 HP, and other motor loads)
  • NEW 800 series Z-Wave chip: more range for reliable wireless communication
  • Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range
  • Power monitoring in live mode or over time*
  • SmartStart and S2 authenticated security 
  • Great for use with quality LED and incandescent bulbs (don't connect to fans over 3A or large appliances. NOTE: FEIT bulbs are not recommended)
  • Status restore: the plug remembers and goes back to original state after power failure
  • Built-in signal repeater: keep your network fast and healthy
  • Check out ZEN04 Frequently Asked Questions


  • Z-Wave Region: US, CA, MX / EU, UK - choose your region before adding this product to cart
  • Z-Wave Chip: 800 series
  • Power: 1 CR2450 battery (included)
  • Mounting Bracket (included)
  • Wireless Range: Up to 300 feet line of sight with traditional Z-Wave mesh (up to 1300 feet with Z-Wave Long Range)
  • Operating Temperature: 40° – 90° F
  • Dimensions: 2.2” x 1.3” x 0.2”
  • Installation: Indoor or outdoor under eve in the bracket


  • Compatibility: 
    • Z-Box Hub 
    • 2GIG (no advanced settings available)
    • ADT Pulse (no advanced settings available)
    • Ezlo Plus (select "Generic Z-Wave device" from the Device Wizard list)
    • Ezlo Secure (select "Generic Z-Wave device" from the Device Wizard list)
    • Fibaro Home Center 2
    • Fibaro Home Center Lite
    • Home Assistant (Z-Wave JS)
    • HomeSeer
    • Hubitat
    • Indigo
    • ISY994Zw
    • Jeedom
    • openHAB
    • Ring (no power consumption info or advanced settings - on/off control only)
    • SmartThings 
  • Before installing, make sure the load does not exceed 960W for incandescent lights, 150W for LED's, 3A for fans and motors, or 15 A for resistive load. How to include the Smart Plug to your smart home network?:

    • Insert the Smart Plug into a standard 120 V receptacle
    • Put your Z-Wave controller in inclusion/pairing mode
    • Click the Z-Wave button on the plug 3 times quickly to finalize the inclusion process
    • A new on/off device will appear on your hub's device list

You recently viewed

Clear recently viewed