Picture for illustrative purposes only. Actual product may vary slightly in appearance. KEY FEATURES Convert EU-style cords and plugs to US-styl...
View full details
Perfect fan for adding DIY quiet cooling to most SBCs and enclosures. KEY FEATURES 2.54mm pitch female connectors for connecting directly to I/...
View full details
Limited Supply - Get Yours While They Last! The Banana Pro/Pi 7.0 inch touch screen LCD module connects to the LVDS/RGB/CPU display interface ...
View full details
Out of stock
The Bright Pi is a breakout/add on board for the Raspberry Pi (can be used with other I2C devices too - like most other single board computers, Ard...
View full details
KEY FEATURES Universal Bluetooth Audio Receiver Supports A2DP Stereo Profile Classic Bluetooth v2.0 support Bluetooth High Speed v3.0 support Cl...
View full details
Uninterruptible power supply (and battery backup) designed specifically for the ODROID-C1/C1+/C2, and compatible with similar SBCs like Raspberry P...
View full details
Out of stock
This USB Audio Adapter should work with any system, but requires configuration through ALSA or other sound drivers. The CM108AH is a highly integra...
View full details
KEY FEATURES Mini-USB Bluetooth dongle CSR8510 A10 Chipset Classic Bluetooth v2.0 support Bluetooth High Speed v3.0 support Bluetooth Low Energy...
View full details
Are you ready to drive a race car? The Universal Motion Joypad is a game controller that is similar to the steering wheel available for the Nintend...
View full details
The Ultrasonic Ranging Module provides stable readings and accurately measures distance. This module can be used for a number of projects such as f...
View full details
The U3 Shield Tinkering Kit is a bag of goodies to add on to the U3 IO Shield to give makers more possibilities for ODROID-connected electronics. I...
View full details
The U3 IO Shield is designed to be mounted to the U3 via spacers and connected via the 8 pin GPIO connector on the U3. It is meant as a developmen...
View full details
Recommended USB adapter for reading/writing images onto microSD and eMMC modules. Engineered to deliver super fast data transfer speeds, the RDF5 U...
View full details
KEY FEATURES Color: Silver, Red and Black with Red LED Material: PVC and Stainless Steel Rated Load: 12V/20A Pins: 3 ( + / - / LED ) Warranty is ...
View full details
Perfect fan for adding DIY quiet cooling to most SBCs and enclosures. KEY FEATURES Channels for flow acceleration Motor hub size minimized Anti-vi...
View full details
Standard USB3.0AM to Micro B Cable [0253] Warranty is valid for two weeks, starting upon date of receipt.
Out of stock
As one of the smallest systems around there are so many amazing things you could do with the Raspberry Pi if it was self-powered and portable. Int...
View full details
KEY FEATURES Laser-cut Acrylic Panels Allows installation of 3.5 Touchscreen Display Shield Colors: Clear, Smoky Blue, Smoky White Compatible with...
View full details
Out of stock
The JustBoom Raspberry Pi Amp HAT was designed to be simple to install and use. With no soldering required and all the mounting hardware already pr...
View full details
Out of stock
Harness the clarity of your high-definition music files with the JustBoom Pi Zero amplifier board. Audio the way it was meant to be heard!The Just...
View full details
Out of stock
The JustBoom Raspberry Pi DAC HAT (digital to analog converter) was designed to be simple to install and use. With no soldering required and all th...
View full details
Out of stock
The JustBoom DAC Zero pHAT is a plug and play, high resolution, digital-to-analog converter for the Raspberry Pi Zero and is by far the easiest and...
View full details
Out of stock
The JustBoom Raspberry Pi Digi HAT was designed to be simple to install and use. With no soldering required and all the mounting hardware already p...
View full details
Don't Forget Your eMMC Reader! This eMMC comes preinstalled with an OS. However, if you wish to back up this eMMC to your computer or write a new ...
View full details
Don't Forget Your eMMC Reader! This eMMC comes preinstalled with an OS. However, if you wish to back up this eMMC to your computer or write a new ...
View full details
Specially-designed adapter board for improved display quality under heavy loads when connected to an ODROID-XU4/XU3. This bridge board is designed ...
View full details
KEY FEATURES Compatible with Raspberry Pi 2/3 Model B and Raspberry Pi Model B+, and the ODROID-C1+ also fits (see NOTES below). Material - ABS Co...
View full details
The Biscuit™ is an integrated module consisting of 3 dimensional motion sensor and WiFi communication module. The 3 dimensional motion sensor inclu...
View full details
ATmega328 mini module with breadboard-compatible pins (included, but not attached). KEY FEATURES Arduino-compatible 14 digital input/output pins...
View full details
Need a small and light speaker to add sound to a project? Look no further. Combined with our mini stereo amplifier, this provides sound on par with...
View full details
KEY FEATURES MMA7760FC Sensor Chip Contains capacitance MEMS accelerometer with low-pass filter, compensation 0g offset and gain errors, and ...
View full details
System console interface board for platform development and debugging. INCLUDES (1) UART Interface Board (4) 8" Female-Female Jumper Wires KEY F...
View full details
Out of stock
System console interface board for platform development and debugging. KEY FEATURES CP2104: USB to Serial UART bridge IC with 1.8V interface Molex...
View full details
Power your ODROID-C0 / C1 / C1+ / C2 / U2 / U3 / W from a USB charger or USB recharger with this cable. KEY FEATURES Inner diameter 0.8mm, outer d...
View full details
Out of stock
Tiny USB Microphone for your Single Board Computer, laptop or desktop! KEY FEATURES Advanced digital USB provides superior clarity with the simpli...
View full details
KEY FEATURES USB to IO expansion board for GPIO/PWM/SPI/UART/I2C/ADC interfaces 3.3V/5V compatible PIC18F45K50-QFN USB microcontroller is mounted ...
View full details
Add GPS Capability to your ODROID or other SBC running Linux or Android! KEY FEATURES Ublox chipset with patch antenna 50 channel u-blox engine ...
View full details
Out of stock
Do you want to add a small, lightweight portable audio output to your project? With this mini stereo audio amplifier, add one (mono) or two (stereo...
View full details
Add amplified stereo sound to your single-board computer project! KEY FEATURES Ready to assemble - no soldering required! Android and Ubuntu compa...
View full details
Short Crust Plus is the new version of the Short Crust Case designed specifically for the Raspberry Pi Model B+, the Raspberry Pi 2 Model B and the...
View full details
MicroSD cards are supported in nearly all single-board computers. This microSD module can handle all Class 10 tasks, plus provide additional speed ...
View full details
Add a battery for the real-time clock (RTC) on your ODROID / BIOS on Atomic Pi. Keep time / settings even when disconnected from power. KEY FEATUR...
View full details
Out of stock
KEY FEATURES Input Voltage: AC 100-240V 50/60Hz Output: DC 5.0V 2500mA (2.5A) Cable Length: Approx.110 cm Short Circuit Protection Overload Protec...
View full details
Out of stock
For those who want to assemble their own MC-1 Cluster or a variation, this package offers the fan, acrylic mounts and mounting hardware to make it ...
View full details
KEY FEATURES Color: Black with Yellow LED Material: Plastic and Metal Rated Load: 12V/20A Pins: 3 Warranty is valid for two weeks, starting ...
View full details
KEY FEATURES Color: Black with Yellow LED Material: Plastic and Metal Rated Load: 12V/10A (max 16A) Pins: 3 Warranty is valid for two weeks, star...
View full details
KEY FEATURES Color: Black Material: Plastic and Metal Rated Load: 12V/100mA Pins: 3 with wires attached Warranty is valid for two weeks, starting...
View full details
This reader/writer module adapts eMMC modules to be recognized by your personal computer, via USB 2.0, for the purpose of reading contents and fl...
View full details