Out of stock
System console interface board for platform development and debugging. KEY FEATURES CP2104: USB to Serial UART bridge IC with 1.8V interface Molex...
View full details
SATA cables are perfect for ODROID-H2 system builds with tight fitting environments such as the ODROID-H2 Case Type 1, Type 3 and Type 4 to connec...
View full details
KEY FEATURES Inner is positive (RED wire) and outer is negative (BLACK) wire Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. lo...
View full details
Out of stock
This USB Audio Adapter should work with any system, but requires configuration through ALSA or other sound drivers. The CM108AH is a highly integra...
View full details
KEY FEATURES Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. long (approx.) COMPATIBILITY ODROID-N2 ODROID-H2 ROCKPro64 ODR...
View full details
2x20pin header socket is useful when you plug a shield on the ODROID-N2 or any other system with a 2x20 (40-pin) GPIO header when more clearance ...
View full details
KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC 90-degree L-Type connector ...
View full details
This writer does not work with the Hardkernel eMMC Black Modules, but works fine with other eMMC modules. Easier and faster way to flash your OS im...
View full details
Standard USB3.0AM to MicroUSB Cable [0253] Warranty is valid for two weeks, starting upon date of receipt.
KEY FEATURES Breaks out stereo audio from the HDMI port to a 3.5mm (1/8 inch) jack Includes 3.5mm (1/8 inch) audio cable (not needed if using spea...
View full details
System console interface board for platform development and debugging. The major change of the USB-UART2 Kit is a Type-C Connector from Micro-USB. ...
View full details
KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC NOTES Compatible with C2 /...
View full details
12-pin cable for ODROID-XU4 I2S Port Warranty is valid for two weeks, starting upon date of receipt.
Out of stock
USB3.0 OTG Micro-A type connector to standard-A host connector converter cable. Convert the OTG Micro-A converter on the XU series to a standard U...
View full details
7 pin GPIO ribbon cable (200mm) for C1+ / C2 Warranty is valid for two weeks, starting upon date of receipt.
