Hardkernel

12-pin cable for ODROID-XU4 I2S Port Warranty is valid for two weeks, starting upon date of receipt.

This is a spare battery pack for the ODROID-GO Kit or other devices that have the Molex 51021-0200 connector for LiPo batteries. Lithium Polymer re...

This Power Supply delivers high quality stable and low noise power supply for the ODROID-HC2, ODROID-N2, ODROID-C4 and other systems that have a 5....

This Power Supply delivers high quality stable and low noise power supply for the ODROID-HC2, ODROID-N2, ODROID-C4 and other systems with a 5.5/2.1...

Power supply for any system that needs 15V at up to 4A with a barrel connector (5.5mm/2.1mm), such as the ODROID-H2+ and the Odyssey. KEY FEAT...

This module is the 16 way GPIO expander for the I2C interface, and built with the MCP23017. MCP23017 has a high-speed I2C interface which supports ...

This shield is perfect for building stand-alone projects with an inexpensive user interface.  The 2 buttons allow basic control.  The 7 LEDs can be...

3pin AC power cord is not included. You need a generic PC power supply AC power cord.LINKS https://wiki.odroid.com/accessory/power_supply_bat...

You need this part to use a USB-UART Module Kit. The 4 pin connector holes, located at [F] on the PCB board and you need to SOLDER the 4 pin connec...

2x20pin header socket is useful when you plug a shield on the ODROID-N2 or any other system with a 2x20 (40-pin) GPIO header when more clearance ...

Fully assembled 3.5inch display with 480x320 pixels TFT LCD and a resistive touch overlay. Just plug it on top of ODROID-C2/C1+/C0. This display sh...

Replacement screen for the ODROID-GO ADVANCE.

30-pin and 12-pin dual-stacking header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own sh...

30-pin and 12-pin header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own shield for the O...

4 channel relay board will provide the ability to control high voltage and high current external devices through GPIO pins easily. FEATURES Add-o...

"For international orders, please refrain from choosing Globegistics as your shipping option. Unfortunately, we are not permitted to ship lithium b...

KEY FEATURES 100~240VAC input 5V/2A DC output 2.5mm outer(-) diameter/0.7mm inner(+) diameter barrel connector Switching mode adapter "L" shap...

The Stepmotor Controller board is designed to control up to 6 step motors and support CAN-FD bus, its layout and pinout are especially organised fo...

7 pin GPIO ribbon cable (200mm) for C1+ / C2 Warranty is valid for two weeks, starting upon date of receipt.

KEY FEATURES Lithium Polymer rechargeable cell with a protection circuit Capacity: 750mAh Dimension: 50 x 21 x 9 mm Lead wires: AWG#30, 50mm Conne...