Out of stock
The PineCube is a computer with the main goal of providing a platform for a small, inexpensive IP camera solution with interchangeable lenses and a...
View full details
Out of stock
Need a small and light speaker to add sound to a project? Look no further. Combined with our mini stereo amplifier, this speaker provides sound for...
View full details
Blue illuminated Power Button for the ODROID-H2 with pre-assembled jumper wires. There is a small power switch on the ODROID-H2 board. But it is n...
View full details
Out of stock
This module is the 16 way GPIO expander for the I2C interface, and built with the MCP23017. MCP23017 has a high-speed I2C interface which supports ...
View full details
Out of stock
This LCD displays 20 characters wide, 4 rows in white texts on blue background. It has a back-light, a contrast adjust potentiometer, and a simple ...
View full details
SATA cables are perfect for ODROID-H2 system builds with tight fitting environments such as the ODROID-H2 Case Type 1, Type 3 and Type 4 to conn...
View full details
This 13MP Color Camera Module using a Sony IMX214 CMOS image sensor attaches to the ROCKPro64 MiPi-CSI Camera port. This m12 mount lens model comes...
View full details
Out of stock
The oCam 1CGN-U Plus is a global shutter color camera with high speed capture up to 160fps @ 320x240. It is UVC compliant and has a changeable stan...
View full details
KEY FEATURES Designed for 12V applications Rated for 12V/30A current LED built-in to the rocker switch Warranty is valid for two weeks, starting ...
View full details
KEY FEATURES Designed for 12V applications Rated for 12V/20A current LED built-in to the tip of the toggle Three terminals (ACC, PWR, GND) Warran...
View full details
Two position, maintained toggle switch with red LED indicator. Warranty is valid for two weeks, starting upon date of receipt.
Out of stock
Handy assortment of 1.27mm (.050") male header and female connectors for the VoCore and VoCore2 SBCs. Can also be used on other projects with 1.27m...
View full details
Helpful any time you need to attach to an RCA female connector. Length: 12" (305mm) Warranty is valid for two weeks, starting upon date of receipt.
Out of stock
3-in-1 Mobile Power Voltage, Current Meter, USB Charger Meter. KEY FEATURES Includes RESET button to clear time and total consumed. Displays: DC...
View full details
KEY FEATURES Blue and white 16x2 character LCD Integrated I2C module for communication Adjustable LCD contrast INCLUDES (1) 16x2 LCD module and...
View full details
Out of stock
VoCore2 Lite is a tiny single-board computer. Use it for all types of projects where tiny size, inexpensive cost and built-in WiFi are important. T...
View full details
Looking for an easy gift for the Tinkerer or Maker in your family? How about an electronic Gift Card for ameriDroid? Please note: If you buy a gift...
View full details
Out of stock
The VoDisplay Screen is a super fast screen (by USB2.0 standards) for high quality display usage for embed devices. It uses a USB2.0 port to displa...
View full details
Continuous (full rotation) micro servo motor for use with the ODROID-GO Game Kit. Key Features Weight : 9g Dimension(mm) : 23 x 12.3 x 29 mm Torqu...
View full details
Out of stock
Motion detector sensor for use with the ODROID-GO Game Kit. KEY FEATURES Voltage: 5V – 20V Power Consumption: 65mA TTL output: 3.3V, 0V Lock time:...
View full details
This Red, Green, Blue (RGB), and Clear Light Sensing with IR Blocking Filter is designed for use with the ODROID-GO Game Kit, and can be used for p...
View full details
The ROM-WT138LM(N) series are remote control receiver modules designed for use with the ODROID-GO Game Kit. Pin diode and receiver IC are assembled...
View full details
High resolution photography for the ROCKPro64 by Pine64! This 13MP Color Camera Module using Sony IMX214 CMOS image sensor attaches to the ROCKPro6...
View full details
Need a breadboard for your next development project, or just tinkering for fun? Looking to build and test circuits to integrate into your design? L...
View full details
Need a small breadboard for your next development project, or just tinkering for fun? Looking to build and test circuits to integrate into your des...
View full details
Want to brighten up your Raspberry Pi Zero, while making it easier to identify pins? How about adding some color, with color coded GPIO headers! Th...
View full details
These are spare header pins for the ODROID-GO Kit, and are also an excellent choice for your DIY project. Warranty is valid for two weeks, startin...
View full details
Out of stock
This is a spare battery pack for the ODROID-GO Kit or other devices that have the Molex 51021-0200 connector for LiPo batteries. Lithium Polymer re...
View full details
Out of stock
This is a single LCD module as a spare part for the ODROID-GO kit. The display has 320x240 pixels and the communication interface is SPI. Warranty ...
View full details
KEY FEATURES Jumper wires (Dupont-style breadboarding/prototyping wires) for establishing an electrical connection between two points in a circuit...
View full details
Out of stock
KEY FEATURES Jumper wires (Dupont-style breadboarding/prototyping wires) for jumping between GPIO pins or establishing an electrical connection be...
View full details
Out of stock
KEY FEATURES Jumper wires (Dupont-style breadboarding/prototyping wires) for jumping between GPIO pins or establishing an electrical connection be...
View full details
Build your own custom modular tablet! The pictured tablet has a green front and back. Many front/back color options available. The sides will come ...
View full details
12-pin cable for ODROID-XU4 I2S Port Warranty is valid for two weeks, starting upon date of receipt.
7 pin GPIO ribbon cable (200mm) for C1+ / C2 Warranty is valid for two weeks, starting upon date of receipt.
The ODROID-VU5A is your new 5-inch multi-touch screen for the ODROID-C2, ODROID-C1+, ODROID-C0 and ODROID-XU4 - with audio capability! Connect the ...
View full details