ODROID-C1+

KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC 90-degree L-Type connector ...

Product may differ slightly from picture. KEY FEATURES  4x USB 3.0 HUB Plug & Play and Hot Swappable UP to 5Gbps LED light display Window...

System console interface board for platform development and debugging. The major change of the USB-UART2 Kit is a Type-C Connector from Micro-USB. ...

Don't Forget Your eMMC Reader! This eMMC DOES NOT come preinstalled with an OS. If you wish to back up this eMMC to your computer or write a OS im...

KEY FEATURES Breaks out stereo audio from the HDMI port to a 3.5mm (1/8 inch) jack Includes 3.5mm (1/8 inch) audio cable (not needed if using spea...

The K18 multimedia wireless keyboard is designed to be used as a remote keyboard with complete input and control capabilities for single-board comp...

Fully assembled 3.5inch display with 480x320 pixels TFT LCD and a resistive touch overlay. Just plug it on top of ODROID-C2/C1+/C0. This display sh...

KEY FEATURES USB 2.0 Type A to Micro-size Type B Cable length : 0.8m   NOTES May differ in appearance from the pictured item May be used for dat...

Compatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield 2 provides stereo RCA connectors and an S/PDIF...

KEY FEATURES White Case and Cable USB 2.0 4x USB2.0 ports 480Mbps maximum transfer rate 2.60 x 0.87 x 0.75 in. (6.6 x 2.2 x 1.9 cm) 0.78 oz (22g) ...

Add another USB host port to your late-model U3, C1, C1+, C2, Pi Zero or Banana Series by utilizing the micro-USB connector.   COMPATIBILITY ODROI...

KEY FEATURES Laser-cut Acrylic Panels Allows installation of 3.5 Touchscreen Display Shield Colors: Clear, Smoky Blue, Smoky White Compatible with...

Tiny USB Microphone for your Single Board Computer, laptop or desktop! KEY FEATURES Advanced digital USB provides superior clarity with the simpli...

Add Gigabit Ethernet capability to your USB3.0-equipped ODROID with this adapter.  USB2.0-equipped SBCs will run at a slower speed. Picture is for ...

KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC NOTES Compatible with C2 /...

Fully assembled 3.2 inch 320x240 display with resistive touch overlay.  Simply plug it into the SBC's 26-pin or 40-pin header.  Leaves 14 pins unus...

Uninterruptible power supply (and battery backup) designed specifically for the ODROID-C1/C1+/C2, and compatible with similar SBCs like Raspberry P...

Made for the ODROID-C2/C1+ and laser cut for high dimensional accuracy with powder-coated steel finish. It's a fact that ODROID protection is very ...

You're probably itching to put together some fun embedded computer projects with the ODROID-C1, ODROID-XU4 with Shifter Shield, or other SBC with R...

Compatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield provides stereo RCA connectors, a 3.5mm stereo...

The oCam supports plug-and-play and is UVC compliant adapting the standard M12 lens with a focal length of 3.6mm. Direct memory access via USB 3.0 ...