ODROID-C1+

Adapts Hardkernel eMMC modules (64GB or smaller) to a standard microSD card connector. This allows eMMC modules to be read from and written to by ...

Add a battery for the real-time clock (RTC) on your ODROID / BIOS on Atomic Pi.  Keep time / settings even when disconnected from power. KEY FEATUR...

Add a battery for the real-time clock (RTC) on your ODROID-N2-Plus and other systems with a CR2032 socket. Also designed for standard PCs with a BI...

Add wireless capability to your ODROID or other SBC!  Also compatible with Windows, Mac, Desktop Linux, Raspberry Pi, Banana Pi and more!  No driv...

System console interface board for platform development and debugging. KEY FEATURES CP2104: USB to Serial UART bridge IC with 1.8V interface Molex...

Add wireless capability to your ODROID or other SBC!  Also compatible with Windows, Mac, Desktop Linux, Raspberry Pi, Banana Pi and more!  No drive...

This Translucent Black or Clear case has openings for all the outputs including the GPIO pins, making it a great fit for projects that need to conn...

This USB Audio Adapter should work with any system, but requires configuration through ALSA or other sound drivers. The CM108AH is a highly integra...

The Weather Board 2 is the preferred low-cost environmental sensing solution with BME280 and Si1132 on one board. The combination of the BME280 and...

KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC 90-degree L-Type connector ...

System console interface board for platform development and debugging. The major change of the USB-UART2 Kit is a Type-C Connector from Micro-USB. ...

KEY FEATURES Breaks out stereo audio from the HDMI port to a 3.5mm (1/8 inch) jack Includes 3.5mm (1/8 inch) audio cable (not needed if using spea...

Compatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield 2 provides stereo RCA connectors and an S/PDIF...

KEY FEATURES Laser-cut Acrylic Panels Allows installation of 3.5 Touchscreen Display Shield Colors: Clear, Smoky Blue, Smoky White Compatible with...

KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC NOTES Compatible with C2 /...

Fully assembled 3.2 inch 320x240 display with resistive touch overlay.  Simply plug it into the SBC's 26-pin or 40-pin header.  Leaves 14 pins unus...

Uninterruptible power supply (and battery backup) designed specifically for the ODROID-C1/C1+/C2, and compatible with similar SBCs like Raspberry P...

You're probably itching to put together some fun embedded computer projects with the ODROID-C1, ODROID-XU4 with Shifter Shield, or other SBC with R...

Compatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield provides stereo RCA connectors, a 3.5mm stereo...