eMMC Adapter
Adapts Hardkernel eMMC modules (64GB or smaller) to a standard microSD card connector. This allows eMMC modules to be read from and written to by ...
View full detailsAdapts Hardkernel eMMC modules (64GB or smaller) to a standard microSD card connector. This allows eMMC modules to be read from and written to by ...
View full detailsAdd a battery for the real-time clock (RTC) on your ODROID / BIOS on Atomic Pi. Keep time / settings even when disconnected from power. KEY FEATUR...
View full detailsAdd a battery for the real-time clock (RTC) on your ODROID-N2-Plus and other systems with a CR2032 socket. Also designed for standard PCs with a BI...
View full detailsAdd wireless capability to your ODROID or other SBC! Also compatible with Windows, Mac, Desktop Linux, Raspberry Pi, Banana Pi and more! No driv...
View full detailsSystem console interface board for platform development and debugging. KEY FEATURES CP2104: USB to Serial UART bridge IC with 1.8V interface Molex...
View full detailsAdd wireless capability to your ODROID or other SBC! Also compatible with Windows, Mac, Desktop Linux, Raspberry Pi, Banana Pi and more! No drive...
View full detailsThis Translucent Black or Clear case has openings for all the outputs including the GPIO pins, making it a great fit for projects that need to conn...
View full detailsIdentical specifications to the original Hardkernel ODROID WiFi Module 5 Add dual-band 2.4/5GHz 802.11ac capability (plus other modes) with USB3.0/...
View full detailsAdd wireless capability to your ODROID or other SBC! Also compatible with Windows, Mac, Desktop Linux, Raspberry Pi, Banana Pi and more! No drive...
View full detailsThis USB Audio Adapter should work with any system, but requires configuration through ALSA or other sound drivers. The CM108AH is a highly integra...
View full detailsAdd GPS Capability to your ODROID or other SBC running Linux or Android! KEY FEATURES Ublox chipset with patch antenna 50 channel u-blox engine ...
View full detailsThe Weather Board 2 is the preferred low-cost environmental sensing solution with BME280 and Si1132 on one board. The combination of the BME280 and...
View full detailsKEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC 90-degree L-Type connector ...
View full detailsDon't Forget Your eMMC Reader! This eMMC comes preinstalled with an OS. However, if you wish to back up this eMMC to your computer or write a new ...
View full detailsKEY FEATURES Breaks out stereo audio from the HDMI port to a 3.5mm (1/8 inch) jack Includes 3.5mm (1/8 inch) audio cable (not needed if using spea...
View full detailsSystem console interface board for platform development and debugging. The major change of the USB-UART2 Kit is a Type-C Connector from Micro-USB. ...
View full detailsCompatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield 2 provides stereo RCA connectors and an S/PDIF...
View full detailsKEY FEATURES Laser-cut Acrylic Panels Allows installation of 3.5 Touchscreen Display Shield Colors: Clear, Smoky Blue, Smoky White Compatible with...
View full detailsKEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC NOTES Compatible with C2 /...
View full detailsFully assembled 3.2 inch 320x240 display with resistive touch overlay. Simply plug it into the SBC's 26-pin or 40-pin header. Leaves 14 pins unus...
View full detailsUninterruptible power supply (and battery backup) designed specifically for the ODROID-C1/C1+/C2, and compatible with similar SBCs like Raspberry P...
View full detailsYou're probably itching to put together some fun embedded computer projects with the ODROID-C1, ODROID-XU4 with Shifter Shield, or other SBC with R...
View full detailsCompatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield provides stereo RCA connectors, a 3.5mm stereo...
View full detailsDon't Forget Your eMMC Reader! This eMMC comes preinstalled with an OS. However, if you wish to back up this eMMC to your computer or write a new ...
View full detailsThis shield is perfect for building stand-alone projects with an inexpensive user interface. The 2 buttons allow basic control. The 7 LEDs can be...
View full detailsKEY FEATURES Blue and white 16x2 character LCD Integrated I2C module for communication Adjustable LCD contrast INCLUDES (1) 16x2 LCD module and...
View full detailsKEY FEATURES Blue and white 16x2 character LCD Integrated I2C module for communication Adjustable LCD contrast INCLUDES (1) 16x2 LCD module and...
View full detailsKEY FEATURES Sandisk Ultra UHS-1 module Preinstalled Ubuntu Ready to run NOTE See picture for demonstration of how to install COMPATIBI...
View full details7 pin GPIO ribbon cable (200mm) for C1+ / C2 Warranty is valid for two weeks, starting upon date of receipt.
The Biscuit™ is an integrated module consisting of 3 dimensional motion sensor and WiFi communication module. The 3 dimensional motion sensor inclu...
View full detailsBoost your Computer / SBC to the next level of storage performance with SSD or HDD. The USB3.0 to SATA Bridge Board contains a USB3.0 to SATA3 con...
View full detailsKEY FEATURES Sandisk Ultra UHS-1 module Preinstalled Android Ready to run NOTE See picture for demonstration of how to install COMPATIBIL...
View full detailsThe Chroma C Servo Board allows control of up to eight radio-control (RC) servos or electronic speed controllers (ESC) via the GPIO pins on the C0/...
View full detailsAre you ready to drive a race car? The Universal Motion Joypad is a game controller that is similar to the steering wheel available for the Nintend...
View full detailsThis Translucent Black or Clear case has openings for all the outputs including the GPIO pins, making it a great fit for projects that need to conn...
View full detailsSign up to get "In The Know"
Copyright © 2024 ameriDroid.