Out of stock
Identical specifications to the original Hardkernel ODROID WiFi Module 5 Add dual-band 2.4/5GHz 802.11ac capability (plus other modes) with USB3.0/...
View full details
Out of stock
Add wireless capability to your ODROID or other SBC! Also compatible with Windows, Mac, Desktop Linux, Raspberry Pi, Banana Pi and more! No drive...
View full details
Out of stock
Add wireless capability to your ODROID or other SBC! Also compatible with Windows, Mac, Desktop Linux, Raspberry Pi, Banana Pi and more! No drive...
View full details
Out of stock
Add wireless capability to your ODROID or other SBC! Also compatible with Windows, Mac, Desktop Linux, Raspberry Pi, Banana Pi and more! No driv...
View full details
This shield is perfect for building stand-alone projects with an inexpensive user interface. The 2 buttons allow basic control. The 7 LEDs can be...
View full details
30-pin and 12-pin dual-stacking header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own sh...
View full details
30-pin and 12-pin header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own shield for the O...
View full details
Out of stock
KEY FEATURES Lithium Polymer rechargeable cell with a protection circuit Capacity: 750mAh Dimension: 50 x 21 x 9 mm Lead wires: AWG#30, 50mm Conne...
View full details
KEY FEATURES Breaks out stereo audio from the HDMI port to a 3.5mm (1/8 inch) jack Includes 3.5mm (1/8 inch) audio cable (not needed if using spea...
View full details
Upgrade power supply for the XU / XU+E / XU Lite / XU3 / XU3 Lite / XU4. KEY FEATURES 100-240VAC input 5V/6A DC output Switching-mode power adapte...
View full details
Out of stock
USB3.0 OTG Micro-A type connector to standard-A host connector converter cable. Convert the OTG Micro-A converter on the XU series to a standard U...
View full details
The Weather Board 2 is the preferred low-cost environmental sensing solution with BME280 and Si1132 on one board. The combination of the BME280 and...
View full details
Add compatibility with the 40-pin GPIO standard to your XU4 or XU3/XU3-Lite*. Use almost any accessory designed for the ODROID-C series 40-pin head...
View full details
Out of stock
Compatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield 2 provides stereo RCA connectors and an S/PDIF...
View full details
Out of stock
Compatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield provides stereo RCA connectors, a 3.5mm stereo...
View full details
You're probably itching to put together some fun embedded computer projects with the ODROID-C1, ODROID-XU4 with Shifter Shield, or other SBC with R...
View full details
Fully assembled 3.2 inch 320x240 display with resistive touch overlay. Simply plug it into the SBC's 26-pin or 40-pin header. Leaves 14 pins unus...
View full details
The Chroma C Servo Board allows control of up to eight radio-control (RC) servos or electronic speed controllers (ESC) via the GPIO pins on the C0/...
View full details
Squeezing all the performance possible out of your XU4 or U3? Operating in enclosed or harsh environments? Replace the passive heatsink with this a...
View full details
KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC NOTES Compatible with C2 /...
View full details
KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC 90-degree L-Type connector ...
View full details
KEY FEATURES Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. long (approx.) COMPATIBILITY ODROID-N2 ODROID-H2 ROCKPro64 ODR...
View full details
Adapts Hardkernel eMMC modules (64GB or smaller) to a standard microSD card connector. This allows eMMC modules to be read from and written to by ...
View full details
Uninterruptible power supply (and battery backup) designed specifically for the ODROID-C1/C1+/C2, and compatible with similar SBCs like Raspberry P...
View full details
Out of stock
This USB Audio Adapter should work with any system, but requires configuration through ALSA or other sound drivers. The CM108AH is a highly integra...
View full details
Are you ready to drive a race car? The Universal Motion Joypad is a game controller that is similar to the steering wheel available for the Nintend...
View full details
The U3 Shield Tinkering Kit is a bag of goodies to add on to the U3 IO Shield to give makers more possibilities for ODROID-connected electronics. I...
View full details
The U3 IO Shield is designed to be mounted to the U3 via spacers and connected via the 8 pin GPIO connector on the U3. It is meant as a developmen...
View full details
Standard USB3.0AM to Micro B Cable [0253] Warranty is valid for two weeks, starting upon date of receipt.
KEY FEATURES Laser-cut Acrylic Panels Allows installation of 3.5 Touchscreen Display Shield Colors: Clear, Smoky Blue, Smoky White Compatible with...
View full details
Don't Forget Your eMMC Reader! This eMMC comes preinstalled with an OS. However, if you wish to back up this eMMC to your computer or write a new ...
View full details
Specially-designed adapter board for improved display quality under heavy loads when connected to an ODROID-XU4/XU3. This bridge board is designed ...
View full details
The Biscuit™ is an integrated module consisting of 3 dimensional motion sensor and WiFi communication module. The 3 dimensional motion sensor inclu...
View full details
Out of stock
System console interface board for platform development and debugging. KEY FEATURES CP2104: USB to Serial UART bridge IC with 1.8V interface Molex...
View full details
KEY FEATURES USB to IO expansion board for GPIO/PWM/SPI/UART/I2C/ADC interfaces 3.3V/5V compatible PIC18F45K50-QFN USB microcontroller is mounted ...
View full details
Add GPS Capability to your ODROID or other SBC running Linux or Android! KEY FEATURES Ublox chipset with patch antenna 50 channel u-blox engine ...
View full details
Add amplified stereo sound to your single-board computer project! KEY FEATURES Ready to assemble - no soldering required! Android and Ubuntu compa...
View full details
Add a battery for the real-time clock (RTC) on your ODROID / BIOS on Atomic Pi. Keep time / settings even when disconnected from power. KEY FEATUR...
View full details
Out of stock
For those who want to assemble their own MC-1 Cluster or a variation, this package offers the fan, acrylic mounts and mounting hardware to make it ...
View full details
KEY FEATURES Blue and white 16x2 character LCD Integrated I2C module for communication Adjustable LCD contrast INCLUDES (1) 16x2 LCD module and...
View full details
Out of stock
This VESA kit helps to mount the ODROID-H2 enclosed with the “Case TYPE 2” to your LCD TV or LCD monitor. The “Case Type 2” and this kit can be put...
View full details
Out of stock
This LCD displays 20 characters wide, 4 rows in white texts on blue background. It has a back-light, a contrast adjust potentiometer, and a simple ...
View full details
Cooling fan designed for use with the ODROID-H3/H4 with PWM and speed sensor to keep your ODROID-H3/H4 cool! Fits inside the ODROID-H3/H4 o...
View full details
SATA cables are perfect for ODROID-H2 system builds with tight fitting environments such as the ODROID-H2 Case Type 1, Type 3 and Type 4 to conn...
View full details
For those who want to protect the ODROID-N2 and N2+ board from dust and the elements. KEY FEATURES Strong & Durable Poly Carbonate Plastic Pro...
View full details
Don't Forget Your eMMC Reader! This eMMC comes preinstalled with an OS. However, if you wish to back up this eMMC to your computer or write a new ...
View full details
Don't Forget Your eMMC Reader! This eMMC comes preinstalled with an OS. However, if you wish to back up this eMMC to your computer or write a new ...
View full details
2x20pin header socket is useful when you plug a shield on the ODROID-N2 or any other system with a 2x20 (40-pin) GPIO header when more clearance ...
View full details