Out of stock
System console interface board for platform development and debugging. KEY FEATURES CP2104: USB to Serial UART bridge IC with 1.8V interface Molex...
View full details
Out of stock
Due to overwhelming demand, orders for this product will be limited to five (5) per customer. Orders over this amount will be cancelled. If you re...
View full details
Blue illuminated Power Button for the ODROID-H2 with pre-assembled jumper wires. There is a small power switch on the ODROID-H2 board. But it is n...
View full details
KEY FEATURES Inner is positive (RED wire) and outer is negative (BLACK) wire Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. lo...
View full details
The Large Breakout board is much more robust than the Baby Breakout board. The board provides large screw terminal I/O, prototype area, USB<-&g...
View full details
Real Time Clock Shield for the ODROID-C2 and C4 Attach this RTC Shield to the GPIO header on the ODROID-C2 or C4 to keep time when the C2/C4 is off...
View full details
Add compatibility with the 40-pin GPIO standard to your XU4 or XU3/XU3-Lite*. Use almost any accessory designed for the ODROID-C series 40-pin head...
View full details
The Pinecil v2 is a smart mini portable soldering iron with a 32-bit RISC-V SoC featuring a sleek design, auto standby and it heats up to an operat...
View full details
System console interface board for platform development and debugging. INCLUDES (1) UART Interface Board (4) 8" Female-Female Jumper Wires KEY F...
View full details
KEY FEATURES Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. long (approx.) COMPATIBILITY ODROID-N2 ODROID-H2 ROCKPro64 ODR...
View full details
Out of stock
New version of Pinecil, Pinecil v2 available here. The Pinecil is a smart mini portable soldering iron with a 32-bit RISC-V SoC featuring a sleek d...
View full details
KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC 90-degree L-Type connector ...
View full details
2x20pin header socket is useful when you plug a shield on the ODROID-N2 or any other system with a 2x20 (40-pin) GPIO header when more clearance ...
View full details
The Weather Board 2 is the preferred low-cost environmental sensing solution with BME280 and Si1132 on one board. The combination of the BME280 and...
View full details
Product may differ slightly from picture. Provide high-current power to your single-board computer or other electronics project using this high-qu...
View full details
Out of stock
This LCD displays 20 characters wide, 4 rows in white texts on blue background. It has a back-light, a contrast adjust potentiometer, and a simple ...
View full details
30-pin and 12-pin dual-stacking header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own sh...
View full details
KEY FEATURES Great for making DIY wire harnesses or jumping between headers on PCBs. Dupont-style breadboarding/prototyping wires Wires are ...
View full details
30-pin and 12-pin header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own shield for the O...
View full details
System console interface board for platform development and debugging. The major change of the USB-UART2 Kit is a Type-C Connector from Micro-USB. ...
View full details
KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC NOTES Compatible with C2 /...
View full details
You're probably itching to put together some fun embedded computer projects with the ODROID-C1, ODROID-XU4 with Shifter Shield, or other SBC with R...
View full details
KEY FEATURES Provides a convenient means to connect the XU3, XU3-Lite and XU4 expansion port to your own projects 5.5 inch long ribbon cable Warr...
View full details
These are spare header pins for the ODROID-GO Kit, and are also an excellent choice for your DIY project. Warranty is valid for two weeks, startin...
View full details