Components

Various components for tinkering, development, and repairs.
RTC Battery

RTC Battery

$3.45

Add a battery for the real-time clock (RTC) on your ODROID.  Keep time even when disconnected from power. KEY FEATURES Can keep RTC running for 3 ...

View full details
$3.45
USB-UART Module Kit

USB-UART Module Kit

$12.95

System console interface board for platform development and debugging. KEY FEATURES CP2104: USB to Serial UART bridge IC with 1.8V interface Molex...

View full details
$12.95
SATA Data and Power Cable
Coming Soon

SATA Data and Power Cable

$3.95

SATA cables are perfect for ODROID-H2 system builds with tight fitting environments such as the ODROID-H2 Case Type 1, Type 3 and Type 4 to connec...

View full details
$3.95
Coming Soon
LED Power Button
Coming Soon

LED Power Button

$7.95

Blue illuminated Power Button for the ODROID-H2 with pre-assembled jumper wires. There is a small power switch on the ODROID-H2 board. But it is n...

View full details
$7.95
Coming Soon
USB Audio Adapter
Coming Soon

USB Audio Adapter

$4.95

This USB Audio Adapter should work with any system, but requires configuration through ALSA or other sound drivers. The CM108AH is a highly integra...

View full details
$4.95
Coming Soon
XU4 Shifter Shield

XU4 Shifter Shield

$19.95

Add compatibility with the 40-pin GPIO standard to your XU4 or XU3/XU3-Lite*. Use almost any accessory designed for the C1's 40-pin header or the R...

View full details
$19.95
RTC Shield for C2

RTC Shield for C2

$5.45

Real Time Clock Shield for the ODROID-C2 Attach this RTC Shield to the GPIO header on the ODROID-C2 to keep time when the C2 is offline. The Lithiu...

View full details
$5.45
DC Plug and Cable Assembly 5.5mm L-Type

DC Plug and Cable Assembly 5.5mm L-Type

$1.95

KEY FEATURES Inner is positive (RED wire) and outer is negative (BLACK) wire Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. lo...

View full details
$1.95
DC Plug and Cable Assembly 5.5mm

DC Plug and Cable Assembly 5.5mm

$1.95

KEY FEATURES Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. long (approx.) COMPATIBILITY ODROID-N2 ODROID-H2 ROCKPro64 ODR...

View full details
$1.95
USB3.0 to SATA Bridge Board Plus

USB3.0 to SATA Bridge Board Plus

$15.95

Boost your Single Board Computer to the next level of storage performance with SSD or HDD. The USB3.0 to SATA Bridge Board Plus contains a USB3.0 ...

View full details
$15.95
ODROID-GO 2.4inch 320x240 TFT LCD Module

ODROID-GO 2.4inch 320x240 TFT LCD Module

$6.95

This is a single LCD module as a spare part for the ODROID-GO kit. The display has 320x240 pixels and the communication interface is SPI. Warranty ...

View full details
$6.95
DC Plug and Cable Assembly 2.5mm L-Type

DC Plug and Cable Assembly 2.5mm L-Type

$1.95

KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC 90-degree L-Type connector ...

View full details
$1.95
USB GPS Module
Save 9%

USB GPS Module

$21.95
$19.95

Add GPS Capability to your ODROID or other SBC running Linux or Android!   KEY FEATURES Ublox chipset with patch antenna 50 channel u-blox engine ...

View full details
$21.95
$19.95
Save 9%
Weather Board 2

Weather Board 2

$19.95

The Weather Board 2 is the preferred low-cost environmental sensing solution with BME280 and Si1132 on one board. The combination of the BME280 and...

View full details
$19.95
2x20 Pin Female Header Extender

2x20 Pin Female Header Extender

$2.95

2x20pin header socket is useful when you plug a shield on the ODROID-N2 or any other system with a 2x20 (40-pin) GPIO header when more clearance ...

View full details
$2.95
30-pin and 12-pin Dual-Stacking Header Sockets

30-pin and 12-pin Dual-Stacking Header Sockets

$2.95

30-pin and 12-pin dual-stacking header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own sh...

View full details
$2.95
Stereo Boom Bonnet (Amp + Speakers)

Stereo Boom Bonnet (Amp + Speakers)

$14.95

Add amplified stereo sound to your single-board computer project! KEY FEATURES Ready to assemble - no soldering required! Android and Ubuntu compa...

View full details
$14.95
1200mAh 3.7V LiPo Battery Pack
Coming Soon

1200mAh 3.7V LiPo Battery Pack

$5.95

This is a spare battery pack for the ODROID-GO Kit or other devices that have the Molex 51021-0200 connector for LiPo batteries. Lithium Polymer re...

View full details
$5.95
Coming Soon
30-pin and 12-pin Header Sockets

30-pin and 12-pin Header Sockets

$1.95

30-pin and 12-pin header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own shield for the O...

View full details
$1.95
C0/C1+/C2 HiFi Shield 2 with S/PDIF

C0/C1+/C2 HiFi Shield 2 with S/PDIF

$44.95

Compatible with the ODROID-C0/C1+/C2. Not compatible with the original ODROID-C1. The HiFi Shield 2 provides stereo RCA connectors and an S/PDIF op...

View full details
$44.95
DC Plug and Cable Assembly 2.5mm

DC Plug and Cable Assembly 2.5mm

$1.95

KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC NOTES Compatible with C1 /...

View full details
$1.95
C0 Connector Pack
Coming Soon

C0 Connector Pack

$2.95
$1.95

This connector pack gives your C0 projects ultimate flexibility. Soldering equipment and skills are required. Most connectors are identical to thos...

View full details
$2.95
$1.95
Coming Soon
I2C 20×4 LCD Module

I2C 20×4 LCD Module

$8.95

This LCD displays 20 characters wide, 4 rows in white texts on blue background. It has a back-light, a contrast adjust potentiometer, and a simple ...

View full details
$8.95
UPS3-C1/C2 with 3000mAh Battery

UPS3-C1/C2 with 3000mAh Battery

$45.95

Uninterruptible power supply (and battery backup) designed specifically for the ODROID-C1/C1+/C2, and compatible with similar SBCs like Raspberry P...

View full details
$45.95

You recently viewed

Clear recently viewed
x