Robotics

New version of Pinecil, Pinecil v2 available here. The Pinecil is a smart mini portable soldering iron with a 32-bit RISC-V SoC featuring a sleek d...

The Pinecil v2 is a smart mini portable soldering iron with a 32-bit RISC-V SoC featuring a sleek design, auto standby and it heats up to an operat...

The Teensy USB Development Board is a complete USB-based microcontroller development system, in a very small footprint, capable of implementing man...

Need a small and light speaker to add sound to a project? Look no further. Combined with our mini stereo amplifier, this speaker provides sound for...

Do you want to add a small, lightweight portable audio output to your project? With this mini stereo audio amplifier, add one (mono) or two (stereo...

KEY FEATURES M3 Threading Outside Measurements: Nylon: ~5.5mm hex Brass: ~4.5mm hex Aluminum: ~4.5mm hex Conductivity: Nylon: Non-conductive B...

The Teensy is a complete USB-based microcontroller development system, in a very small footprint, capable of implementing many types of projects. ...

Need a small and light speaker to add sound to a project? Look no further. Combined with our mini stereo amplifier, this provides sound on par or b...

The Biscuit™ is an integrated module consisting of 3 dimensional motion sensor and WiFi communication module. The 3 dimensional motion sensor inclu...

KEY FEATURES Color: Silver, Red and Black with Red LED Material: PVC and Stainless Steel Rated Load: 12V/20A Pins: 3 ( + / - / LED ) Warranty is ...

The NVIDIA® Jetson Xavier™ NX Developer Kit brings supercomputer performance to the edge. It includes a power-efficient, compact Jetson Xavier NX mo...

ATmega328 mini module with breadboard-compatible pins (included, but not attached).  KEY FEATURES  Arduino-compatible 14 digital input/output pins...

This kit comes with enough resistors for most projects at an affordable price. Great for people who are just starting out with electronics. KEY FEA...

KEY FEATURES No Load Running Speed: 0.12sec/60° at 4.8V Size :  23 x 12.2 x 29mm Weight: 9g Gear/Case Type: Plastic/Plastic Interface Type: Compat...

KEY FEATURES MPU-6050 Sensor Chip Contains MEMS accelerometer & gyro in a single chip - captures x, y and z channels simultaneously 3~5VDC IIC...

Continuous (full rotation) micro servo motor for use with the ODROID-GO Game Kit. Key Features Weight : 9g Dimension(mm) : 23 x 12.3 x 29 mm Torqu...

This kit includes 370 high voltage capacitors in varying quantities based on frequency of use. KEY FEATURES 630V high voltage multilayer cerami...

KEY FEATURES 1/4 Watt 10 Pieces Each of 86 Values. 860 Pieces Total High Quality 1% Metal Film Resistors Copper Wire Every value is in order from ...

KEY FEATURES No Load Running Speed: 0.14sec/60° at 4.8V, 0.12sec/60° at 6V Torque Force: 1.3kg/cm at 4.8V, 1.5kg/cm at 6V Size :  23 x 12.2 x 29mm...

The Chroma C Servo Board allows control of up to eight radio-control (RC) servos or electronic speed controllers (ESC) via the GPIO pins on the C0/...

KEY FEATURES 33 of the most common capacitance values from 4.7pF to 470uF 15 each of 23 values and 30 each of the 10 most common values. High qual...

KEY FEATURES 3 booklets which serve as a guide to how transistors work, how diodes work, and some examples of how these parts can be used in circu...

KEY FEATURES M3 Threading through entire standoff Outside Measurements: Nylon: ~5.5mm hex Brass: ~4.5mm hex Aluminum: ~4.5mm hex Conductivity: ...

The U3 IO Shield is designed to be mounted to the U3 via spacers and connected via the 8 pin GPIO connector on the U3.  It is meant as a developmen...