hardkernel

FEATURES Compatible with ODROID-M1S Barrel to Type-C adapter board. Input 8~17Volt, Output 5V/3A It has a wide input voltage range, which...

The Biscuit™ is an integrated module consisting of 3 dimensional motion sensor and WiFi communication module. The 3 dimensional motion sensor inclu...

Replacement board for the ODROID-GO ADVANCE.

You're probably itching to put together some fun embedded computer projects with the ODROID-C1, ODROID-XU4 with Shifter Shield, or other SBC with R...

Fully assembled 3.2 inch 320x240 display with resistive touch overlay.  Simply plug it into the SBC's 26-pin or 40-pin header.  Leaves 14 pins unus...

Compatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield 2 provides stereo RCA connectors and an S/PDIF...

Compatible with the ODROID-C0/C1+/C2/C4. Not compatible with the original ODROID-C1. The HiFi Shield provides stereo RCA connectors, a 3.5mm stereo...

This board is designed to provide CAN FD (CAN with Flexible Data rate) control to ODROID single board computers, it is easily attachable to GPIO he...

Spare case and buttons kit for the ODROID-GO ADVANCE Black Edition. Note: This is NOT compatible with the original ODROID-GO Advance. INCLUDES To...

The Chroma C Servo Board allows control of up to eight radio-control (RC) servos or electronic speed controllers (ESC) via the GPIO pins on the C0/...

The CloudShell2 NAS kit for the ODROID-XU4 and XU4Q is an affordable DIY Network Attached Storage (NAS) solution with RAID support. Like the origin...

Looking for an audio option to use with your VU7A+ or VU5A? Bring sound to your system with these Compact Stereo Speakers!  KEY FEATURES WorkS wit...

Squeezing all the performance possible out of your XU4 or U3? Operating in enclosed or harsh environments? Replace the passive heatsink with this a...

With this CoreELEC kit, you'll receive everything you need to set up your own customizable media center. Connect it to your big screen TV, projecto...

Add a battery for the real-time clock (RTC) on your ODROID-N2-Plus and other systems with a CR2032 socket. Also designed for standard PCs with a BI...

KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC NOTES Compatible with C2 /...

KEY FEATURES Inner(+) diameter 0.8mm and outer(-) diameter 2.5mm 270mm long (approx.) Max current rating: 2.5A @ 5VDC 90-degree L-Type connector ...

KEY FEATURES Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. long (approx.) COMPATIBILITY ODROID-N2 ODROID-H2 ROCKPro64 ODR...

KEY FEATURES Inner is positive (RED wire) and outer is negative (BLACK) wire Inner(+) diameter 2.1mm and outer(-) diameter 5.5mm 270mm/10in. lo...

Adapts Hardkernel eMMC modules (64GB or smaller) to a standard microSD card connector. This allows eMMC modules to be read from and written to by ...