We strive to ship the XU4 Shifter Shield same day when possible. However, due to high demand, some orders may be slightly delayed. Add compatibilit...
View full details
Real Time Clock Shield for the ODROID-C2 Attach this RTC Shield to the GPIO header on the ODROID-C2 to keep time when the C2 is offline. The Lithiu...
View full details
Fully assembled 3.5inch display with 480x320 pixels TFT LCD and a resistive touch overlay. Just plug it on top of ODROID-C2/C1+/C0. This display sh...
View full details
Add GPS Capability to your ODROID or other SBC running Linux or Android! KEY FEATURES Ublox 6010 chipset with patch antenna 50 channel u-blox 6 ...
View full details
The Weather Board 2 is the preferred low-cost environmental sensing solution with BME280 and Si1132 on one board.The combination of the BME280 and ...
View full details
Save 8%
As one of the smallest systems around there are so many amazing things you could do with the Raspberry Pi if it was self-powered and portable. Int...
View full details
30-pin and 12-pin header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own shield for the O...
View full details
System console interface board for platform development and debugging. KEY FEATURES CH340G: USB to Serial UART bridge IC Allows serial communica...
View full details
The SmartPower2 power supply not only provides 4-5.3VDC output at up to 5A, but also has WiFi connectivity built-in to allow monitoring power utili...
View full details
The Teensy is a complete USB-based microcontroller development system, in a very small footprint, capable of implementing many types of projects. A...
View full details
Save 26%
Google AIY Voice Kit (v1) projects bring do-it-yourself artificial intelligence to your projects! This kit includes all the components needed to as...
View full details
Product may differ slightly from picture. ODROID-XU4 not included. Provide high-current power to your single-board computer or other electronics pr...
View full details
Compatible with the ODROID-C0/C1+/C2. Not compatible with the original ODROID-C1. The HiFi Shield provides stereo RCA connectors, a 3.5mm stereo ...
View full details
Compatible with the ODROID-C0/C1+/C2. Not compatible with the original ODROID-C1. The HiFi Shield 2 provides stereo RCA connectors and an S/PDIF ...
View full details
You're probably itching to put together some fun embedded computer projects with the ODROID-C1, ODROID-XU4 with Shifter Shield, or other SBC with R...
View full details
myAHRS+ is a high performance AHRS (Attitude Heading Reference System). This is useful for determining the physical orientation of the module for m...
View full details
30-pin and 12-pin dual-stacking header sockets are designed for the ODROID-XU series, including the ODROID-XU4. It is useful for making your own sh...
View full details
KEY FEATURES USB to IO expansion board for GPIO/PWM/SPI/UART/I2C/ADC interfaces 3.3V/5V compatible PIC18F45K50-QFN USB microcontroller is mounte...
View full details
Xprotolab Plain is an Oscilloscope, Logic Analyzer, Waveform & Clock generator all in one tiny, lightweight and low cost package. Xprotolab Pla...
View full details
KEY FEATURES 10 Pieces Each of 86 Values. 860 Pieces Total. High Quality 1% Metal Film Resistors Copper Wire Every value is in order from least to...
View full details
KEY FEATURES Color: Silver and Black Material: Plastic and Metal Rated Load: 12V/6A Pins: 5 Dimensions: Button diameter 10mm, Head diameter 18mmm,...
View full details
Add-on for 2x13 or 2x20 2.5mm pitch SBCs (single-board computers) like Raspberry Pi2 and ODROID-C1+. For creation of circuits to use with compatibl...
View full details
Fully assembled 3.2 inch 320x240 display with resistive touch overlay. Simply plug it into the SBC's 26-pin or 40-pin header. Leaves 14 pins unus...
View full details
This shield is perfect for building stand-alone projects with an inexpensive user interface. The 2 buttons allow basic control. The 7 LEDs can be...
View full details